FireProtect Plus Jeweller

Wireless fire detector with temperature and carbon oxide sensors that monitors security in the room twenty four hours a day and immediately notifies of dangerous CO levels, smoke and sharp jumps in temperature.
3.099 UAH
VAT included
Where to buy
  • Authentication to prevent forgery
  • Jamming detection and communication channels encryption
  • Tampering alarm
  • Certification
The device registers smoke, sharp jumps in temperature, and dangerous CO levels
It can operate independently from Ajax Hub, notifying of danger by means of a built-in siren
The device independently tests the smoke chamber and gives prompt notification of the need to dust

Principle of operation

The device detects smoke by means of a camera with a photoelectric sensor. An additional chemical element detects carbon oxide and raises the alarm.

Features

It can operate independently from the hub, emitting a fire alarm by means of a built-in siren. Several detectors indicate an alarm simultaneously.

Installation and set up

Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.

Principle of operation

The device detects smoke by means of a camera with a photoelectric sensor. An additional chemical element detects carbon oxide and raises the alarm.

Features

It can operate independently from the hub, emitting a fire alarm by means of a built-in siren. Several detectors indicate an alarm simultaneously.

Installation and set up

Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.

Tech specs

Classification
Radio channel smoke detector with temperature sensor and built-in siren
Type of detector
Wireless
Installation method
Indoors
Compatibility
Sensing element
Photoelectric, CO and temperature sensors
Activation threshold
+59°С ±2°С
Type of notification
Sound/light
Volume of built-in siren
85 dB
Alarm signal delivery time
0.15 s
False alarm filter
+
Interconnected alarms
+
Power supply
Battery: Two CR2 batteries, 3 V
Backup power supply: battery CR2032
Battery life
Up to 4 years

Learn more
Jeweller radio technology
Communication range with central unit — up to 1,300 m in an open space
Two-way communication between devices

Radio frequency bands:
866.0 – 866.5 MHz
868.0 – 868.6 MHz
868.7 – 869.2 MHz
905.0 – 926.5 MHz
915.85 – 926.5 MHz
921.0 – 922.0 MHz
(depends on the region of sale)

Self-adjusting RF output power — up to 20 mW
Block encryption based on AES algorithm
Detector polling period — 12−300 s

Learn more about Jeweller
Additional temperature sensor
Available
Operating temperature range
From 0°С to +65°С
Permissible humidity
Up to 80%
Anti-sabotage
Protection against fraud
Jamming detection
Tamper-resistant
Remote setting and testing
+
Dimensions
132 × 132 × 31 mm
Weight
220 g
Warranty
Replacement and repair within 24 months of the date of sale. Batteries are not covered under warranty.
Complete set
FireProtect Plus detector
SmartBracket mounting panel
2 x CR2 batteries (pre-installed)
1 x backup battery CR2032 (pre-installed)
Installation set
User’s guide

Choose the most suitable Ajax set in 2 minutes

Tell us what you need to protect and we will put together a set of detectors and devices for your premises.
Start

Recommended products

Wireless smoke & heat detector with sounder

Wireless indoor siren

Wireless flood detector

If you see any mistape, please select text and press Ctrl + Enter

Spelling error report

The following text will be sent to our editors: