OBUbeD
MotionCam S (PhOD) Jeweller
Wireless IR motion detector supporting photo by alarm, photo on demand, photo by schedule, and photo by scenario features. Superior edition
yA5lgs
9td1WlCommunication
Jeweller communication technology
Proprietary wireless communication technology to transmit alarms and events.
Key features:
- Two-way communication.
- Advanced anti-sabotage.
- Block encryption featuring a dynamic key.
- Instant notifications.
- Remote configuration via the Ajax apps.
Frequency bands
868.0–868.6 MHz
Maximum effective radiated power (ERP)
up to 20 mW
Automatic power control to reduce power consumption and noise interference.
Radio signal modulation
GFSK
Radio signal range
up to 5,600 ft
Between detector and control panel (or range extender) in an open space.
Encrypted communication
All the data stored and transmitted are protected by block encryption with a dynamic key.
Frequency hopping
Radio communication uses frequency hopping to prevent interception and jamming.
Wings communication technology
Proprietary wireless communication technology to transmit photo verifications.
Key features:
- Two-way communication.
- Block encryption featuring a dynamic key.
- Advanced anti-sabotage.
- Data package reloading in case of transmission errors.
- Photo delivery check.
Frequency bands
868.0–868.6 MHz
Radio signal range
up to 5,600 ft
Between detector and hub or range extender in an open space.
Encrypted communication
All the data stored and transmitted are protected by block encryption with a dynamic key.
Frequency hopping
Radio communication uses frequency hopping to prevent interception and jamming.
Detection
Sensitive element
PIR sensor
Motion detection distance
up to 39* ft
When installed at a height of 7.9 ft.
* — 32.8 ft according to INCERT (with high sensitivity level)
Motion detection angles
horizontal: 88.5°
Motion detection speed
from 1 to 6.6 ft/s
The direction of the detector lens should be perpendicular to an alleged intrusion path into the facility.
Sensitivity
3 levels
Adjusted by PRO or user with admin rights in the Ajax app
Pet immunity
weight: up to 44 lb
height: up to 1.6 ft
False alarm prevention
SmartDetect
Software algorithm.
Temperature compensation
Effective motion detection at temperatures from 14°F to 104°F.
Photo verification
Photo by Alarm
A built-in camera is activated if the detector is armed and motion is detected.
Photo on Demand
The user takes pictures at any time or when the detector is armed (depending on settings). The feature is disabled by default.
Photo by Scenario
The detector’s camera takes pictures automatically when other Ajax detectors are triggered. The feature is disabled by default.
Photo by Schedule
The detector automatically takes photos at a specified time. This feature is available for hubs (except Hub Jeweller) with firmware version OS Malevich 2.19 or higher.
Adjustable photo resolution
640 × 480 px
320 × 240 px (by default)
160 × 120 px
Adjusted by PRO or user with admin rights in the Ajax app.
IR backlight
For night photography and low light conditions.
Series of pictures
from 1 to 5 images with a resolution of 320 × 240 px or 160 × 120 px
from 1 to 3 images with a resolution of 640 × 480 px
Adjusted by PRO or user with admin rights in the Ajax app.
Photo delivery time
up to 7 s — 160 × 120 px resolution
up to 9 s — 320 × 240 px resolution
up to 20 s — 640 × 480 px resolution
Photo delivery time depends on the image resolution selected in the device settings.
Recommendations
It is recommended to install the detector at a height of 7.9 ft.
The device is designed for indoor use only.
Sabotage protection
Tamper alarm
Notifications on attempts to detach the detector from the surface or remove it from the mounting panel.
Holding screw
to secure the detector on SmartBracket
Protection against spoofing
device authentication
Communication loss detection
after 36 s
Detection time depends on the Jeweller or Jeweller/Fibra settings.
Power supply
Batteries
2 × CR123A
Pre-installed.
Type
Type C.
Calculated battery life
up to 4 years
With Photo on demand toggle disabled.
up to 3 years
With Photo on demand toggle enabled.
Detector’s operating voltage range
4.2−6.2 V⎓
Detector’s nominal operating voltage
6 V⎓
Quiescent detector’s current consumption at nominal voltage
0.058 mA
Maximum detector’s current consumption at nominal voltage
18 mA
Full capacity
3,300 mAh
Low battery voltage
4.55 V⎓
Low battery recovery voltage
4.9 V⎓
End-of-life battery voltage
4.2 V⎓
Device is switched off.
End-of-life battery capacity
600 mAh
Manufacturer
Panasonic
Enclosure
Dimensions
5.31″ × 2.75″ × 2.60″
Weight of the white device
5.82 oz
Weight of the black device
5.26 oz
Operating temperature range
from 14 °F to 104 °F
Operating humidity
up to 75%
Protection class
IP50, IK04
Colours
Black
White
Complete set
MotionCam S (PhOD) Jeweller
SmartBracket mounting panel with holding screw
2 × CR123A battery (pre-installed)
Installation kit
Quick start guide
hQt5e6
MotionCam S (PhOD) Jeweller
MotionCam S (PhOD) Jeweller
Compliance with the security alarm standards
Certificate issued by TREZOR TEST s.r.o.
EN 50131-1:2006 / A1:2009 / А2:2017 / A3:2020
EN 50131-2-2:2021
EN 50131-6:2017 / A1:2021**
EN 50131-5-3:2017
PD 6662:2017*
Security Grade (SG)
Certificate issued by TREZOR TEST s.r.o.
2
Radio Equipment Directive (RED)
Certificate issued by MiCOM Labs
EN 300 220-1 V3.1.1
EN 300 220-2 V3.2.1
Restriction of Hazardous Substances Directive (RoHS)
Test report issued by Shenzhen NTEK Testing Technology Co.
EN IEC 63000:2018
Electromagnetic Compatibility Directive (EMC)
Certificate issued by MiCOM Labs
EN 301 489-1 V2.2.3
EN 301 489-3 V2.1.1
EN 55032:2015+A11:2020
EN 55035:2017+A11:2020
Low Voltage Directive (LVD)
Test report issued by Shenzhen NTEK Testing Technology Co.
EN 62479:2010
EN 62368-1:2014+A11:2017
Environmental class according to EN 50131
Certificate issued by TREZOR TEST s.r.o.
||
INCERT
Kiwa Nederland B.V.
T 031:2017+A1:2018+A2:2022
PSTI UK
BSI Assurance UK Limited
Schedule 1