Hub 2 Plus Jeweller

Security alarm control panels

The vital element of any security system is the control panel. The security system's central connects the warning system and sensitive sensors. The main functionality of the control panel is to receive and control alarm sensors, analyse them, and notify users of an incident.

The principle of operation of alarm control panels

The control panel receives signals from various glass break sensors, door and window opening sensors and motion detectors.

After receiving a message about an incident, the alarm central analyses it. If the signal is out of range, a signal is transmitted to the warning system, which is as follows:

1. Unlocking doors.
2. Activation of the fire extinguishing system.
3. Transmission of an alarm signal to the central control of the security company.
4. Automatically send notifications or call the owner.
5. Sirens for the light and sound warning.

Advantages of installing modern control panels for territory protection

New-generation alarm control panels can be connected to surveillance cameras, and the received data can be stored on a hard disk. Several phone numbers can be connected to the mailing list if calls and notifications to the user's phone are used as a notification system.

The security system can be controlled, and settings can be changed using the keyboard and the security key fob. Some control panel models can be configured for remote control from the user's mobile phone.

When choosing a control panel for signalling, you should pay attention to the presence of a built-in battery that maintains the operation of the control panel, even during power outages or interruptions.

Types of control panels for alarm

According to their intended purpose, control panels are security – they react to breaking glass and opening windows and doors once they respond to the start of a fire and smoke and universal, which are responsible for monitoring security and fire.

Alarm panels differ in the type of signal transmission and are wireless and wired. Wireless alarm panels are easy to set up and install, even in ready-made interiors, while wired alarm panels require wiring.

Control panel with photo confirmation of alarms, LTE/3G/2G and Wi-Fi – Ajax Hub 2 Plus Jeweller

The control panel for managing the Ajax security system supports photo confirmation of the MotionCam motion sensor alarms. Sending messages is possible to users through notifications or calls and to the central monitoring station of a security company. The Hub 2 Plus Jeweller, an intelligent alarm control panel, uses four independent communication channels to transmit signals: Wi-Fi, Ethernet and two SIM cards supporting high-speed LTE networks.

Features of the control panel for the Hub 2 Plus Jeweller alarm system

The Hub 2 Plus Jeweller, a smart alarm control panel, supports high-speed LTE networks and is equipped with a communication module with four independent communication channels. This device configuration allows users to connect the control panel to two different Internet providers via Wi-Fi, Ethernet, and two cellular networks. Automatic switching between communication channels takes less than a minute.

The control panel of the Ajax Hub 2 Plus Jeweller security system controls the operation of all connected detectors and devices of the Ajax security system. Communication between Hub 2 Plus Jeweller and alarm devices is carried out using a two-way Jeweller radio protocol at a distance of up to 2 km, provided there are no obstacles.

Hub 2 Plus Jeweller can connect up to 200 sensors at the same time.

Users manage the Ajax security system through an application for mobile devices or a PC, which is possible from any corner of the world. A stable connection is provided by the Ajax Cloud cloud service, which ensures the receipt of control commands and the sending of alarm signals.

Photo-verification of alarms by the MotionCam motion sensor occurs after motion is detected in the protected area. A series of photos of the incident is sent to users in the Ajax application and helps to avoid false alarm responses.

The Ajax security system uses the Wings radio protocol to receive and send a series of images. Additional stability and reliability of data delivery, even at a low signal level, is guaranteed by the antenna of the Hub 2 Plus Jeweller control panel. Photo verification of alarms, unlike surveillance cameras, allows you to observe the current situation even at an Internet speed of 0.5 kbps.

Hub 2 Plus Jeweller can protect large objects with a complex organisation. The system user can cover up to 35 km² of the area using the Rex repeater, connect up to 200 users and create up to 25 security groups. The Hub 2 Plus Jeweller alarm control panel allows you to create up to 64 automation scenarios, minimising the impact on human safety.

Hub 2 Plus Jeweller can turn off the protection of an object or group and turn it on according to a schedule. The Smart Security System Central supports the connection of third-party cameras with RTSP protocol and seamless integration with Dahua, Hikvision IP cameras and DVRs. Up to 100 photo or video surveillance devices can be connected to the Ajax alarm control panel.

The body of the Ajax Hub 2 Plus Jeweller intelligent control panel is protected from sabotage and failures by a tamper. When trying to dismantle or damage the control panel, the user will receive a notification about the incident.

Ajax Hub 2 Plus Jeweller works even when Ethernet is turned off on backup power for up to 15 hours. The operability of the system sensor is checked every 12 seconds by pings. And detection of a break in communication with the control panel occurs within up to 60 seconds.

The Ajax Geofence security system technology reminds the user to turn on the alarm when leaving the armed area and turn it off upon return.

Installation and configuration of the intelligent control panel Hub 2 Plus Jeweller

Installation of the control panel takes up to 15 minutes per SmartBracket mount, following the prompts from the interactive instructions.

First, Hub 2 Plus Jeweller connects to the power grid and the Internet, and then you need to scan the QR code on the alarm control panel using the Ajax mobile application.

New devices are connected to the security system according to the same principle.