
Seguridad a gran escala



con la batería de reserva

Enlace fiable para una comunicación segura
Hasta 5 repetidores pueden funcionar en el sistema de seguridad
Hub
Hub Plus
Hub 2
Hub 2 Plus
Mejora el sistema de seguridad

El segundo centro de toma de decisiones

-
Siempre sincronizado con el hub
-
Reacción inmediata ante amenazas
-
Nuevas funciones con cada actualización del sistema

Detiene los ataques de intrusos

-
Funciona hasta 35 horas después de un apagón
-
Todos los datos están protegidos por encriptación dinámica de bloque de clave
-
Notifica las inhibiciones y los intentos de sabotaje a la carcasa del dispositivo
Intuitivo para conectar e instalar

-
Código QR
para conexión simple -
Montaje de SmartBracket
para una configuración rápida -
Aplicación móvil para configuración y pruebas
Especificaciones técnicas
Hub Plus — hasta 149
Hub 2 Plus — hasta 199
Hub Plus/Hub 2/Hub 2 Plus — 5
* ReX solo se puede conectar directamente al hub. ReX no se puede conectar a otro ReX
Batería de respaldo incorporada: Li-ion 2 А·h
Hasta 35 horas de funcionamiento sin conexión
Comunicación bilateral entre dispositivos
Frecuencias de funcionamiento: 868.0 - 868.6 MHz
Potencia de salida de radiofrecuencia autoajustable: hasta 25 mW
Cifrado por bloques basado en algoritmo AES
Período de sondeo del detector: 12−300 s
Saltos de frecuencia
Leer más sobre Jeweller >
Detección de inhibición
Resistente a la manipulación
Panel de fijación SmartBracket
Cable de alimentación
Kit de instalación
Guía rápida
Elija el conjunto Ajax más adecuado en 2 minutos
Productos recomendados
Ajax ReX intelligent signal repeater for security
Ajax ReX is an Ajax radio repeater that extends the range of all devices connected to the security system. The ReX signal repeater controls the alarm devices connected to it, allowing users to install them at a considerable distance from the control panel: in detached buildings, multi-storey offices, or large production. The coverage of the radio network of the security system can be extended up to 35 km² if five radio repeaters are connected to it.
Ajax ReX signal repeater functionality
ReX can run all or part of users security system devices. At the same time, the number of devices connected to the repeater does not affect the speed of delivery of alarms.
The ReX radio repeater integrates burglar alarm detectors into an autonomous group within the system. Suppose the radio communication with the control panel is interrupted. In that case, the ReX signal repeater will take control: it will receive an alarm signal from the sensor and scare off the intruder with a loud siren.
ReX is based on the Malevich OS, which provides the device with reliability and allows easy management of security features. The capabilities and role of ReX insecurity are growing with Malevich OS updates — free for users.
Features of the Ajax ReX radio repeater
The ReX radio repeater for signalling continuously synchronizes data about the system and its status with the security system. The device responds instantly to the operation of security sensors and gets new features with each update.
ReX is protected from attacks at the hardware and software levels. OS Malevich operating system protects the device from cyberattacks and viruses. The information from the ReX repeater cannot be intercepted — the device receives and transmits all data in encrypted form. Sudden power outages in the protected room will not be a problem — ReX is equipped with a large battery that provides autonomous operation for 35 hours. Thanks to the two-way Jeweler radio protocol, communication with the control panel takes place at a distance of up to 1800 m without obstacles. Also, the device is subject to a health test every 12 to 300 seconds.
If an attacker tries to mute the signal or damage the device’s integrity, ReX will sound the alarm. Thanks to the tamper on the device’s body, users of the system will immediately know about the attempt to dismantle the repeater from the surface.
Complete set of Ajax ReX
The Ajax ReX repeater kit for security devices includes:
- Ajax ReX radio repeater;
- power cable;
- SmartBracket mounting;
- mounting kit;
- instruction.
Ajax ReX compatibility
Ajax ReX only works with the Hub, Hub Plus and Hub 2 control panels. The repeater is not connected to the uartBridge and ocBridge Plus receiving panels.
Installation and adjustment of the Ajax ReX signal repeater
The Ajax ReX radio repeater is ready to work out of the box. The device is configured in the Ajax mobile application after reading the QR code indicated on the case, and alarm detectors are connected in one click.
The repeater is mounted on the alarm in a few minutes to attach the SmartBracket with screws or double-sided tape.