
Siempre en contacto: por cable, Wi-Fi, LTE
La comunicación con el exterior es fundamental para los paneles de control de alarmas. Su fiabilidad garantiza la entrega en corto tiempo de señales de alarma a las Centrales Receptoras de Alarmas y a los usuarios del sistema.
El Hub 2 Plus hace que la estabilidad de la comunicación con el exterior sea siempre posible. Tiene 4 canales de comunicación y soporta LTE. Esta configuración le permite conectar el dispositivo a dos proveedores de Internet por separado a través de Ethernet y Wi-Fi mientras tiene dos servicios móviles listos como respaldo. El cambio de canal se realiza automáticamente en cuestión de segundos.Verificación de alarma con foto en 9 segundos
La verificación fotográfica es el futuro de la industria de seguridad. Esta tecnología – una solución óptima tanto para locales comerciales como para residenciales– es accesible y está diseñada para respetar la privacidad. Las series de fotos animadas de los detectores MotionCam permiten a los usuarios y a los operadores de la CRA evaluar la situación en curso. Pero las cámaras fotográficas se activan solo en respuesta a las alarmas, nunca a petición.
Hub 2 Plus puede administrar hasta 200 detectores MotionCam y despachar confirmaciones fotográficas de las alarmas a los usuarios y a las centrales receptoras de alarmas en solo 9 segundos, incluso al utilizar tarjetas SIM para la comunicación. Gracias al soporte de LTE.
Envío garantizado de alarmas y confirmaciones fotográficas
Jeweller utiliza tramas de tiempo para sincronizar la comunicación con los dispositivos conectados, autenticación para eliminar la falsificación y cifrado para proteger contra fugas de datos. Además, es un protocolo de radio de alta eficiencia energética que permite que los detectores funcionen durante años con las baterías preinstaladas.
Más información sobre las tecnologías y características de JewellerSeguridad automatizada

-
Agua
-
LeaksProtect
-
Relay
-
Electroválvula

-
Armamento
-
Relay
-
Cerradura eléctrica
-
Horario
-
WallSwitch
-
Persiana enrollable

-
MotionProtect Outdoor
-
WallSwitch
-
Alumbrado público
Protección de grandes instalaciones con una organización interna compleja
grupos de seguridad
usuarios
dispositivos en el sistema
de cobertura máxima de alcance de radio con 5 ReX

Resistente al sabotaje
- Período de sondeo del dispositivo a partir de 12 segundos
- Detección de pérdida de la conexión con un hub en 60 segundos
- Funcionamiento con batería de reserva hasta 15 horas
Preparado para el futuro
El Hub 2 Plus funciona con OS Malevich, un sistema operativo en tiempo real desarrollado por Ajax Systems. OS Malevich es extremadamente estable, inmune a los virus y protegido contra los ciberataques.
La arquitectura modular simplifica la constante actualización del sistema operativo OS Malevich. El sistema obtiene nuevas funciones varias veces al año a través de actualizaciones de software automáticas. El proceso no involucra a los ingenieros ni a los usuarios y se implementa en minutos, solo cuando el sistema de seguridad está desarmado.
Hub 2 Plus es el panel de control Ajax más eficiente. Tiene un procesador que es 4,5 veces más rápido que el Hub 2 y que tiene 8 veces más memoria flash. Esta configuración de hardware permite que el dispositivo funcione durante años y siga siendo importante.Controlado con apps

Instalación sin complicaciones
Hub 2 Plus está listo para trabajar desde el primer momento. Viene con comunicadores preinstalados, una fuente de alimentación y una batería de reserva. Para empezar a configurar el sistema, tendrá que enchufar el dispositivo a un tomacorriente, conectarlo a Internet, insertar las tarjetas SIM y escanear el código QR con la app. Gracias a SmartBracket, ni siquiera tendrá que desensamblar el dispositivo para montarlo.
Todos los ajustes del sistema de seguridad están siempre disponibles en la app. Incluso cuando esté lejos del hub, puede conectar dispositivos de seguridad o cámaras CCTV, añadir usuarios, probar la intensidad de la señal de radio, crear grupos de seguridad y escenarios, o conectar un hub a una central receptora de alarmas.
Actualización perfecta del sistema de seguridad
¿Qué hub elegir?
Comparar
Especificaciones técnicas
Android 5.0 o posterior
2G (GSM900/DCS1800 (B3/B8))
3G (WCDMA 850/900/2100 (B1/B5/B8))
LTE (FDD B1/B3/B5/B7/B8/B20)
Wi-Fi (802.11 b/g/n)
Ethernet
Tipos de notificación: SMS, llamada, notificación push
Software para las CRAs con soporte de fotoverificación
6 V con alimentación alternativa de 6V PSU
Consumo de energía de la red — 10 W
Proporciona hasta 15 horas de duración de la batería cuando se utiliza solamente una tarjeta SIM
Comunicación bilateral entre dispositivos
Bandas de radiofrecuencia:
866,0 – 866,5 MHz
868,0 – 868,6 MHz
868,7 – 869,2 MHz
905,0 – 926,5 MHz
915,85 – 926,5 MHz
921,0 – 922,0 MHz
(depende de la región de venta)
Potencia de salida de radiofrecuencia autoajustable: hasta 20 mW
Cifrado por bloques basado en algoritmo AES
Período de sondeo del detector: 12−300 s
Saltos de frecuencia
Leer más sobre Jeweller
Envío de paquetes de verificación
Bandas de radiofrecuencia:
866,0 – 866,5 MHz
868,0 – 868,6 MHz
868,7 – 869,2 MHz
905,0 – 926,5 MHz
915,85 – 926,5 MHz
921,0 – 922,0 MHz
(depende de la región de venta)
Potencia de salida de radiofrecuencia autoajustable: hasta 20 mW
Cifrado por bloques basado en algoritmo AES
Notificaciones de interferencia
Tamper para detectar la apertura de la tapa trasera y el desmontaje de SmartBracket
Más información
Panel de montaje SmartBracket
Cable de alimentación
Cable de Ethernet
Kit de instalación
Tarjeta SIM (depende de la región)
Guía del usuario
Elija el conjunto Ajax más adecuado en 2 minutos
Security alarm control panels
The critical element of any security system is the control panel. The security system central connects the warning system and sensitive sensors. The main functionality of the control panel is to receive and control alarm sensors, analyze them, and notify users of an incident.
The principle of operation of alarm control panels
The control panel receives signals from various glass break sensors, door and window opening sensors, and motion detectors.
After receiving a message about an incident, the alarm central analyzes it. If the signal is out of range, a signal is transmitted to the warning system, which is as follows:
- Doors unlocking.
- Activation of the fire extinguishing system.
- Transmission of an alarm signal to the central control of the security company.
- Automatically send notifications or call the owner.
- Light and sound detectors – sirens.
Advantages of installing modern control panels for territory protection
New generation alarm control panels can be connected to surveillance cameras, and the received data can be stored on a hard disk. Several phone numbers can be connected to the mailing list if calls and notifications to the user’s phone are used as a notification system.
The security system can be controlled, and settings can be changed using the keyboard and the security key fob. Some control panel models can be configured for remote control from the user’s mobile phone.
When choosing a control panel for signalling, you should pay attention to the presence of a built-in battery that maintains the operation of the control panel even during power outages or power outages.
Types of control panels for alarm
According to their intended purpose, control panels are security – they react to breaking glass and opening windows and doors, firefighters respond to the start of a fire and smoke, universal – security and fire.
Alarm panels differ in the type of signal transmission and are wireless and wired. Wireless alarm panels are easy to set up and install, even in ready-made interiors, while wired alarm panels require wiring.
Control panel with photo confirmation of alarms, LTE/3G/2G and Wi-Fi – Ajax Hub 2 Plus
The control panel for managing the Ajax security system supports photo confirmation of the MotionCam motion sensor alarms. Sending messages is possible both to users in the form of notifications or calls and the central monitoring station of a security company. The Hub 2 Plus smart alarm control panel uses four independent communication channels to transmit signals: Wi-Fi, Ethernet and two SIM cards with support for high-speed LTE networks.
Features of the control panel for the Hub 2 Plus alarm system
The Hub 2 Plus smart alarm control panel supports high-speed LTE networks and is equipped with a communication module with four independent communication channels. This configuration of the device allows you to connect the control panel to two different Internet providers via Wi-Fi and Ethernet and two cellular networks. Automatic switching between communication channels takes less than a minute.
The control panel of the Ajax Hub 2 Plus security system controls the operation of all connected detectors and devices of the Ajax security system. Communication between Hub 2 Plus and alarm devices is carried out using a two-way Jeweler radio protocol at a distance of up to 2 km, provided there are no obstacles.
Hub 2 Plus can connect up to 200 sensors at the same time.
The Ajax security system is managed by users through an application for mobile devices or a PC and is possible from any corner of the world. A stable connection is provided by the Ajax Cloud cloud service, which ensures the receipt of control commands and the sending of alarm signals.
Photo-verification of alarms by the MotionCam motion sensor occurs after motion is detected in the protected area. A series of photos of the incident is sent to users in the Ajax application and helps to avoid false alarm responses.
The Ajax security system uses the Wings radio protocol to receive and send a series of images. Additional stability and reliability of data delivery even at a low signal level is guaranteed by the antenna of the Hub 2 Plus control panel. Photo verification of alarms, unlike surveillance cameras, allows you to observe the current situation even at an Internet speed of 0.5 kbps.
Hub 2 Plus can protect large objects with a complex organization. The user of the system has the ability to cover up to 35 km² of the area using the Rex repeater, connect up to 200 users and create up to 25 security groups. The Hub 2 Plus alarm control panel allows you to create up to 64 automation scenarios, which minimizes the impact on human safety.
Hub 2 Plus can turn off the protection of an object or group and turn it on according to a schedule. The Smart Security System Central supports the connection of third-party cameras with RTSP protocol, as well as seamless integration with Dahua, Hikvision IP cameras and DVRs. Up to 100 photo or video surveillance devices can be connected to the Ajax alarm control panel.
The body of the Ajax Hub 2 Plus intelligent control panel is protected from sabotage and failures by a tamper. When trying to dismantle or damage the control panel, the user will receive a notification about the incident.
Ajax Hub 2 Plus works even when Ethernet is turned off on backup power for up to 15 hours. The operability of the system sensor is checked every 12 seconds by pings. And detection of a break in communication with the control panel occurs within a period of up to 60 seconds.
The Ajax Geofence security system technology reminds the user to turn on the alarm when leaving the armed area and turn it off upon return.
Installation and configuration of the intelligent control panel Hub 2 Plus
Installation of the control panel takes no more than 15 minutes per SmartBracket mount, following the prompts from the interactive instructions.
First, Hub 2 Plus connects to the power grid and the Internet, and then you need to scan the QR code on the alarm control panel using the Ajax mobile application. New devices are connected according to the same principle.