The synergy of wired and wireless technologies
Hub Hybrid (2G)
Hub Hybrid (2G)
Maximum without expansion modules
Communication through steel and concrete
Fibra communication technology allows you to wire lines up to 2 km long. Eight lines in one system run by Hub Hybrid minimise potential damage. Even a completely broken line leaves the security system at 87% operational. And with wireless detectors, this percentage will be even higher.
Jeweller radio protocol provides two-way communication between the hub and wireless devices at a distance of up to 2,000 meters, allowing remote system control and alarm transmission in 0.15 seconds.
Jeweller applies time frames to synchronize devices communication, authentication to prevent forgery, and encryption to protect the data. An energy-efficient protocol provides wireless devices with from 2 to 7 years of battery life.
Up to 5 range extenders with a communication range of up to 1,800 meters can be connected to Hub Hybrid by radio or cable via Ethernet*.
Always online via Ethernet and cellular networks
Hub Hybrid can be connected to three Internet providers at a time via Ethernet cable and 2G, 3G, and LTE SIM cards. Automatic switching between channels takes seconds.
More than two days on a backup battery
Hub Hybrid with a backup battery can power a system of 30 wired devices for up to 60 hours. To check the system project and estimate the power consumption of devices, use the Fibra power supply calculator. Wireless devices do not require additional power supply, as they are battery-operated.
The six countermeasures
Demounting and case opening detection
The hub board features two tampers that detect opening and demounting attempts.
Protection against device forgery
To authenticate devices, unique tokens and properties are used. The hub checks them for each communication session. If any parameter fails the check, the hub ignores the device commands. The procedure excludes the possibility of system control by a third-party device: key fob, smart button, or keypad.
Hub communication loss detection
Ajax Cloud server polls the hub at intervals of 10 seconds or more. In case of mobile frequencies jamming and disconnection of the wired internet, the server can inform a monitoring station about the complete isolation of the object in just a minute.
All the data stored and transmitted are protected by block encryption with a dynamic key. Radio communication uses frequency hopping, making interception and jamming more difficult.
in 30 seconds
The hub analyses the quality of communication with system devices. If some data packages are lost, the hub will change the transmission frequencies and inform the monitoring station of interference detection.
Event transmission and delivery
The monitoring station is notified about alarms and system events in 0.15 seconds. Due to the addressability of devices, the message includes the time, device model, device name, event type, and room.
Physical protection of the line against break
Hub Hybrid features 8 lines and supports Ring connection topology — up to 4 rings in a hybrid security system. In the event of a line breakage, the ring splits into two working segments, devices continue to operate, and the system notifies a security company and users about the incident.
Alarm photo verification in 9 seconds
Automates security and comfort
Hub Hybrid allows creating up to 32 scenarios. With the hub, you can arm and disarm a facility or part of it by schedule. Instantly activate a smoke machine if someone enters the premises. Switch off the potential cause of ignition and turn on emergency lighting in case of fire. Shut off water in case of a leak. Activate the ventilation and restore the balance if the CO2 level is high. Control lights, electric locks, roller shutters, and garage doors — by arming/disarming, button press, or a detector alarm.Learn more
A complete set of business tools
Alarms of the highest priority
The Ajax app supports critical notifications — events with a loud siren sound ignoring the silent mode of the smartphone.
Instant cloud sync
Ajax apps and security systems communicate through the Ajax Cloud server. The server uses a proprietary binary protocol and automatic load balancing for uninterrupted processing of millions of data packages per minute. The server is physically located in several data centres. This infrastructure provides server availability of 99,995%*.
Progress in the core
Hub Hybrid runs on OS Malevich — a real-time operating system developed by Ajax Systems. The system is immune to viruses, protected from cyber-attacks, and extremely reliable. The hardware configuration allows Hub Hybrid to evolve and remain relevant for years.How does OS Malevich update
New features are ready to use
The hub is updated automatically or by engineer's command via the Internet. The process starts when the system is disarmed and takes less than a minute. Each update improves the system and adds new features.
Convenience in the details
- Pre-installed communication modules х2 SIM Ethernet
- Built-in 110–230 V~ power supply
- Screw-type terminal blocks
- Rails for fixing the backup battery
- 20 fasteners for fixing cables
- 5 perforated zones for cable routing
More freedom with the Fibra technology
With Hub Hybrid, you don't have to wire extra meters of cable. The control panel features 8 terminals compatible with all Fibra devices regardless of the type. Security detectors with photo verification, keypads, or sirens connect to the same line and ensure security of a certain zone. The physical cable connection and the distribution of devices by rooms and groups in the app are not related.
Hub Hybrid is connected and configured via a smartphone or desktop app — forget about command-line or keypad programming. The app interface increases the installation speed and minimises errors.
Power supply stress test
Hub Hybrid features a unique testing mechanism to check the power supply of all wired devices in the system. The test is launched in the app and simulates the maximum possible power consumption: detectors give alarms, keypads are activated, and sirens are turned on. If the system passes the test, you can be sure that all its devices will always have enough power.
100 devices in 10 minutes
We have made the pairing process automatic. The line scanning function shows all devices connected to the hub, allowing you to set names, separate security groups and virtual rooms quickly.
There are two ways to determine which device is in front of you: switching on the LED and by triggering. They allow pointwise bind and test the operation of devices.
Synchronization with the security monitoring station
A monitoring station engineer does not need to configure zones manually. The PRO Desktop monitoring panel automatically synchronizes all information about the hub devices.
To add a device, all you have to do is scan the QR code on the enclosure using the Ajax app. Then set a name, select a room and a security group.
Synchronization with the security monitoring station
The monitoring station engineer does not need to configure the zones manually. The PRO Desktop monitoring panel automatically synchronizes all information about the hub devices.