Hub Hybrid
The synergy of wired and wireless technologies
-
Wings
-
Jeweller
-
Fibra
- Hub Hybrid (4G)
-
Wings
-
Jeweller
-
Fibra
- Hub Hybrid (4g)
This is the device of the Fibra wired product line. To purchase, install and administer such devices, you need to be an accredited partner, undergo training and gain access.
Apply for accessMaximum without expansion modules
Communication through steel and concrete
Fibra
Fibra communication technology allows you to wire lines up to 2 km long. Eight lines in one system run by Hub Hybrid minimise potential damage. Even a completely broken line leaves the security system at 87% operational. And with wireless detectors, this percentage will be even higher.
Jeweller
Jeweller radio protocol provides two-way communication between the hub and wireless devices at a distance of up to 2,000 meters, allowing remote system control and alarm transmission in 0.15 seconds.
Jeweller applies time frames to synchronize devices communication, authentication to prevent forgery, and encryption to protect the data. An energy-efficient protocol provides wireless devices with from 2 to 7 years of battery life.
Up to 5 range extenders with a communication range of up to 1,800 meters can be connected to Hub Hybrid by radio or cable via Ethernet.
Always online via Ethernet and cellular networks
Hub Hybrid can be connected to three Internet providers at a time via Ethernet cable and 2G, 3G, and LTE SIM cards. Automatic switching between channels takes seconds.
More than two days on a backup battery
Hub Hybrid with a backup battery can power a system of 30 wired devices for up to 60 hours1. To check the system project and estimate the power consumption of devices, use the Fibra power supply calculator. Wireless devices do not require additional power supply, as they are battery-operated.
The six countermeasures
Demounting and case opening detection
The hub board features two tampers that detect opening and demounting attempts.
Protection against device forgery
To authenticate devices, unique tokens and properties are used. The hub checks them for each communication session. If any parameter fails the check, the hub ignores the device commands. The procedure excludes the possibility of system control by a third-party device: key fob, smart button, or keypad.
Hub communication loss detection
Ajax Cloud server polls the hub at intervals of 10 seconds or more. In case of mobile frequencies jamming and disconnection of the wired internet, the server can inform a monitoring station about the complete isolation of the object in just a minute.
Data protection
All the data stored and transmitted are protected by block encryption with a dynamic key. Radio communication uses frequency hopping, making interception and jamming more difficult.
in 30 seconds
Jamming detection
The hub analyses the quality of communication with system devices. If some data packages are lost, the hub will change the transmission frequencies and inform the monitoring station of interference detection.
Event transmission and delivery
The monitoring station is notified about alarms and system events in 0.15 seconds. Due to the addressability of devices, the message includes the time, device model, device name, event type, and room.
Physical protection of the line against break
Hub Hybrid features 8 lines and supports Ring connection topology — up to 4 rings2 in a hybrid security system. In the event of a line breakage, the ring splits into two working segments, devices continue to operate, and the system notifies a security company and users about the incident.Ring topology is available with OS Malevich 2.16 and higher.
Alarm photo verification in 9 seconds
Automates security and comfort
Hub Hybrid allows creating up to 32 scenarios. With the hub, you can arm and disarm a facility or part of it by schedule. Instantly activate a smoke machine if someone enters the premises. Switch off the potential cause of ignition and turn on emergency lighting in case of fire. Shut off water in case of a leak. Activate the ventilation and restore the balance if the CO2 level is high. Control lights, electric locks, roller shutters, and garage doors — by arming/disarming, button press, or a detector alarm.
Learn more-
Water
-
LeaksProtect
-
Relay
-
Electrovalve
-
Arming
-
Relay
-
Electric lock
-
Schedule
-
WallSwitch
-
Roller shutter
-
MotionProtect Outdoor
-
WallSwitch
-
Outdoor lighting
A complete set of business tools
App data is protected by encryption and automatic backups. With cloud synchronization, starting work on a new smartphone or computer takes a few minutes — just install the program and log into your account.
Security control via smartphone
The Ajax app allows you to control security, smart plugs, and relays. On-site and remotely.
Alarms of the highest priority
The Ajax app supports critical notifications — events with a loud siren sound ignoring the silent mode of the smartphone.
Alarms of the highest priority
The Ajax app supports critical notifications — events with a loud siren sound ignoring the silent mode of the smartphone.
Instant cloud sync
Ajax apps and security systems communicate through the Ajax Cloud server. The server uses a proprietary binary protocol and automatic load balancing for uninterrupted processing of millions of data packages per minute. The server is physically located in several data centres. This infrastructure provides server availability of 99,995%3.
Progress in the core
Hub Hybrid runs on OS Malevich — a real-time operating system developed by Ajax Systems. The system is immune to viruses, protected from cyber-attacks, and extremely reliable. The hardware configuration allows Hub Hybrid to evolve and remain relevant for years.
How does OS Malevich updateNew features are ready to use
The hub is updated automatically or by engineer's command via the Internet. The process starts when the system is disarmed and takes less than a minute. Each update improves the system and adds new features.
Convenience in the details
- Pre-installed communication modules х2 SIM Ethernet
- Built-in 110–230 V~ power supply
- Screw-type terminal blocks
- Rails for fixing the backup battery
- 20 fasteners for fixing cables
- 5 perforated zones for cable routing
More freedom with the Fibra technology
With Hub Hybrid, you don't have to wire extra meters of cable. The control panel features 8 terminals compatible with all Fibra devices regardless of the type. Security detectors with photo verification, keypads, or sirens connect to the same line and ensure security of a certain zone. The physical cable connection and the distribution of devices by rooms and groups in the app are not related.
No programming
Hub Hybrid is connected and configured via a smartphone or desktop app — forget about command-line or keypad programming. The app interface increases the installation speed and minimises errors.
- Pairing device with a hub via QR
- Managing the system users
- Changing hub settings
- Creating automation scenarios
- Connecting to the monitoring station
Power supply stress test
Hub Hybrid features a unique testing mechanism to check the power supply of all wired devices in the system. The test is launched in the app and simulates the maximum possible power consumption: detectors give alarms, keypads are activated, and sirens are turned on. If the system passes the test, you can be sure that all its devices will always have enough power.
100 devices in 10 minutes
Line scanning
We have made the pairing process automatic. The line scanning function shows all devices connected to the hub, allowing you to set names, separate security groups and virtual rooms quickly.
Device identification
There are two ways to determine which device is in front of you: switching on the LED and by triggering. They allow pointwise bind and test the operation of devices.
Synchronization with the security monitoring station
A monitoring station engineer does not need to configure zones manually. The PRO Desktop monitoring panel automatically synchronizes all information about the hub devices.
QR scanning
To add a device, all you have to do is scan the QR code on the enclosure using the Ajax app. Then set a name, select a room and a security group.
Synchronization with the security monitoring station
The monitoring station engineer does not need to configure the zones manually. The PRO Desktop monitoring panel automatically synchronizes all information about the hub devices.
Technical specifications
Compatible devices
Hybrid alarm control panel Ajax Hub Hybrid (4G or 2G)
A burglar alarm is used for timely detection of violations on the territory under protection. The purpose of the security system is to:- Guaranteed detection of intrusion into the protected area.
- Immediately notify the security service or the owner of the threat.
Ajax Hub Hybrid (4G or 2G) — hybrid security alarm control panel
The Ajax Hub Hybrid (4G or 2G) alarm control panel is the first Ajax control panel to support the new Fibra wired devices and Jeweler wireless devices. The device controls the operation of all Ajax sensors connected to the security system. It sends an alarm signal to the owner and the security console immediately after a detected threat. The Hub Hybrid (4G or 2G) alarm control panel supports photo-captured sensors and has eight independent lines with ring topology support. Provides communication range with Ajax detectors up to 2000 meters via the Jeweler radio protocol without obstacles. And Fibra wire technology allows you to create independent lines up to two km long. The operating frequencies of the control panel are 868.0-868.6 MHz. The device supports 2G, 3G and 4G/LTE Ethernet networks. Combining the two technologies allows you to build comprehensive territory protection, regardless of the size and ceilings and metal or concrete. Security is strengthened by informative messages and photo-verification of alarms, complete real-time system control from the Ajax mobile application, and customizable automation scenarios. Central security alarm Hub Hybrid (4G or 2G) is made in a laconic design of durable plastic. The appearance is universal and suitable for installation in any interior.Features of the control panel Hub Hybrid (4G or 2G)
Fibra technology Using Fibra wired technology, Hub Hybrid (4G) creates independent links up to 2 km long. Eight lanes in a single system running Hub Hybrid (4G or 2G) white minimize the possibility of a loss of connection and potential damage. Thanks to this principle of operation, even a complete break in one line leave the security system working by 87%. And with wireless sensors in the system, this percentage becomes higher. Jeweller technology Jeweller's two-way radio protocol allows the Hub Hybrid (4G or 2G) to communicate with the system's detectors at a distance of up to 2000 meters in the absence of obstacles. Jeweller allows remote control of the security system and transmits alarms in 0.15 seconds. The wireless radio protocol uses frames to encrypt communications, protect data from theft, synchronize device communication sessions, and authenticate to prevent forgery. An energy-efficient protocol allows wireless security sensors to operate on supplied batteries for up to 7 years. Up to 5 repeaters with a communication range of up to 1800 meters can be connected to the Hub Hybrid (4G or 2G) via radio or Ethernet cable. Photo verification of alarms in 9 seconds Hub Hybrid (4G or 2G) supports MotionCam Outdoor and MotionCam wireless motion sensors. Sensors take a series of pictures immediately when motion is detected and allow you to evaluate what is happening on the object in dynamics. The Wings radio protocol is used to quickly transfer a series of photos and verify the delivery of photo confirmations. Ajax Hub Hybrid (4G or 2G) is always online via cellular networks and cable connection Hub Hybrid (4G or 2G) can be connected to three Internet providers simultaneously — via Ethernet cable and 2G cellular networks. Automatic switching between communication channels takes a few seconds. The Hub Hybrid alarm control panel's backup battery can power a system of 30 wired instruments for 60 hours. And devices connected via radio do not need additional power and operate from their built-in batteries. Antisabotage With the help of the tampers on the device case, attempts to dismantle and open the subject are detected. The Ajax Cloud server polls the Hub Hybrid (4G or 2G) every 10 seconds and determines its operability. In case of disconnection of wired Internet and simultaneous jamming of mobile communication frequencies, the server can inform the security console about the isolation of the object in 1 minute. The devices in the system are authenticated using unique properties and tokens that the hub verifies on every communication session. If any of the parameters does not pass the test, the control panel ignores the device commands. The procedure excludes the possibility of controlling the system by a third-party device: key fob, keyboard or smart button. Jamming and communication loss detection in less than a minute Hub Hybrid (4G or 2G) analyzes the quality of communication with connected devices. If part of the packet is lost, the control panel changes frequencies to transmit information and informs the remote control about interference in the air. There is data protection by frequency hopping and encryption. All transmitted data is protected by block encryption with a floating key. In radio transmission, frequency hopping makes it challenging to intercept information and jam the signal. Hub Hybrid (4G or 2G) polls devices every 12 seconds. The administrator sets the polling frequency for wireless devices, and the hub automatically determines the minimum possible interval for wired devices. Thanks to this principle of operation of the control panel, it takes 36 seconds to detect the loss of a device from communication and notify the security console about the incident. Security Automation with Hub Hybrid (4G or 2G) The Hub Hybrid control panel allows you to create 32 automation scenarios and minimize the impact of the human factor on safety. The Hub can manage the protection of an object or group according to a given schedule. The user can activate the house machine when entering the room, de-energise the room, turn on emergency lighting in case of fire and shut off the water in case of a leak. Hub Hybrid gives you the ability to control electric locks, lights, roller shutters and garage doors — in case of a sensor alarm, change of security mode or by pressing a button. The Ajax Hub Hybrid (4G or 2G) signalling central works under OS Malevich, a real-time operating system developed by Ajax Systems. The system is protected from cyberattacks, invulnerable to viruses and highly reliable. The hardware configuration will keep the Hub Hybrid control panel updated and up-to-date for years.Installation and configuration of Ajax Hub Hybrid (4G or 2G)
The Ajax Hub Hybrid (4G or 2G) control panel is easy to set up and manage. To connect, configure and provide remote access to the system, you need the Ajax Security System mobile application. The work begins with scanning the QR code on the device. All settings of devices connected to the security system are performed in the mobile application. Ajax Hub Hybrid (4G or 2G) package bundle The Ajax Hub Hybrid (4G or 2G) alarm control panel kit includes:- Control panel;
- Ethernet cable;
- power cable;
- mounting kit;
- two SIM cards;
- instruction.