Beschermt de toegang tot objecten
Efficiëntie in nabije omgeving
DualCurtain Outdoor bevat technologie om het beschermde gebied uit te breiden, wat uniek is onder gordijnbewegingsdetectoren voor buiten. Als Detectie in nabije omgeving is ingeschakeld, krijgt de bovenste PIR-sensor van de detector een extra smalle sector te zien, gericht in een hoek van 40 graden omlaag ten opzichte van het hoofdgedeelte. Dankzij deze functie kunnen beide sensoren beweging ontdekken wanneer een mens het beschermde gebied binnengaat dicht bij de behuizing van de detector zelf, wat een oplossing is voor het probleem van de blinde vlek die veel dergelijke detectoren hebben.Detectie in nabije omgeving is ontworpen voor de bescherming van ramen en andere toegangen waar huisdieren niet bij kunnen. De nabijheid van de vectoren van de detectiezones verminderen de efficiëntie van de huisdierimmuniteit enorm.
Eén behuizing. Twee onafhankelijke detectoren.
Bestand tegen aanvallen
Regelmatige ondervragingen door de hub
De batterij heeft een levensduur van 4 jaar
Batterijvermogen in de app
Melding als batterij bijna leeg is
Installatie zonder moeilijkheden
Verticaal — afhankelijk van instellingen
Communicatie in twee richtingen tussen apparaten
Werkfrequenties — 868,0 – 868,6 MHz1
Zelfsturend RF-outputvermogen — tot 20 MW
Encryptiebeveiliging op basis van een AES-algoritme
Detectie-onderzoeksperiode — 12 – 300 s
Kom meer te weten over Jeweller
Detectie van jamming
Bestand tegen manipulatie
Montagepaneel voor SmartBracket
2 × CR123A-batterijen (voorgeïnstalleerd)
Outdoor motion sensors for alarm
The protection of the perimeter of both private premises and enterprises needs signal protection. To detect and fix movement in the controlled area, installing a motion sensor is suitable.
Types of sensors and how they work
Types of outdoor sensors by location:
- Perimetric — the type of motion detectors are installed along the territory’s perimeter and determine the movement in the protected area.
- Peripheral presence sensors are mounted on the facades of houses and fences. Detects such a sensor a moving object if the limits of action are violated.
The principle of operation of outdoor security sensors:
An electronic security motion detector for outdoor installation is equipped with a microwave, optical or acoustic sensor, and often a signalling device for lighting control. The sensor captures changes in the field of action, after which, when presence is detected, it transmits an alarm signal to the alarm control panel, which activates the siren.
Presence detectors for signalling, for the most part, operate in a diameter of five meters, but industrial sensors detect movement at a distance of 10-15 meters. For installation in industrial areas, a motion detector is used, to which a flashlight or spotlight is connected.
According to the type of radiation, motion sensors for alarms are divided into:
- Infrared sensor — used to protect the land. Infrared motion detectors for alarms are sensitive to the temperature of the human body in motion, which is recognized by radiation. This type of radio sensor is used in domestic conditions.
- Microwave sensor — the concept of operation is based on the principle of Doppler’s rays. The sensor emits a constant signal that a person will not feel, but when the boundaries are violated, it activates the siren.
- Ultrasonic sensor — the principle of operation is similar to the previous type of sensor. This species is considered the hardiest. Can work around the clock.
Advantages of having a motion sensor
The presence detector for outdoor installation is used to protect the premises and property owners. Additionally, it can be equipped with a video surveillance camera and control the light. The motion detector can control the alarm, halogen light, fire system and other protection mechanisms.
Installation of street presence sensors
Presence detector installation methods depend on the selected device type. Most detectors are connected using a 220V power cable, but wireless outdoor security motion sensors are becoming more and more popular. This type of detector is more efficient than a wired one, as it continues to work in extreme conditions due to autonomous communication. In most cases, the operation of wireless outdoor motion sensors is supported by batteries or accumulators.
How to connect the presence sensor:
- It is necessary to develop a motion sensor connection project before installation. To do this, you need a site plan. When planning the placement of the detector, it is worth considering that communication pipes, especially heating ones, should not be located near it. And also users need to avoid direct sunlight on the device and obstructions to the signal.
- The instructions will be provided with the chosen detection device, where there is an item: installation tips. Depending on the type of outdoor detector, it must be connected in parallel or series. When installed in parallel, the sensor and the central panel are located opposite each other. When connected in series, the detector is mounted first, and then the signal receiver or switch.
- The following steps vary by manufacturer. In most cases, a mounting kit is included with the motion sensor.
Outdoor bidirectional security motion sensor curtain Ajax DualCurtain Outdoor
The Ajax DualCurtain Outdoor wireless motion sensor detects and prevents intrusion into a guarded area. The detector ignores animals up to 80 cm and birds. Weather factors also do not cause false alarms. The device is protected from unauthorized influence by intruders — varnishing, dismantling, hanging, protected from dust and splashes and operates at air temperatures below 0 ° C. The operating range is adjustable up to 30 meters.
The principle of operation of the Ajax DualCurtain Outdoor outdoor motion detector
The Ajax DualCurtain Outdoor motion sensor for signalling detects human movement using two built-in independent IR sensors that detect the infrared radiation of living beings. A two-factor ELSA algorithm checks the data received by the device. It determines the similarities and spectral patterns between two sensor signals, which helps to avoid false alarms. The sensor range is adjustable in up to 30 meters, 15 meters in each direction.
Features of the wireless outdoor motion sensor Ajax DualCurtain Outdoor
Two optical systems with narrow viewing sectors are placed on both sides of the detector. Each of the systems operates based on two IR sensors. The sensor detection accuracy is high due to temperature compensation. A two-factor algorithm analyzes the signals that the sensor gives, and if two sensors simultaneously record the movement of a person, the sensor raises the alarm.
Detection of objects in the near zone
The DualCurtain Outdoor wireless outdoor motion detector uses technology to expand the protected area. When the sensor’s top IR sensor is turned on, it receives an additional narrow sector of view directed at an angle of 40 degrees downward from the primary sector. The mode allows two sensors to detect movement when a person enters a protected perimeter, levelling the blind zone characteristic of such sensors.
When the user activates “Near Detection”, the sensor monitors windows and passages that animals cannot access. The proximity of the vectors of the detection zones reduces the effectiveness of immunity to animals.
One housing — two independent sensors
It is possible to adjust the range of the two sensors independently. This allows you to accurately set the protected perimeter of the DualCurtain Outdoor and eliminate false alarms from random passers-by or trees swaying in the wind. In the mobile application, you can adjust the sensitivity of wireless sensors or deactivate one optical system.
Resistant to deactivation attempts
DualCurtain Outdoor is resistant to interference. Thanks to the tamper on the device case, it will not be possible to remove the device from the mount — an alarm will be triggered. The optical systems of the detector are equipped with masking sensors that react to obstacles, painting of the body and curtaining of the device.
The DualCurtain Outdoor cannot be blinded or silently disabled even if the burglar alarm is disarmed. Even if the wireless motion sensor DualCurtain Outdoor is destroyed instantly, the hub control panel will detect the loss of communication in less than a minute and inform the security console and users about the problem.
Motion detector autonomy for DualCurtain Outdoor alarm
The DualCurtain Outdoor has optimized power consumption, which allows the device to work up to four years without changing batteries. The wireless sensor will warn users of the security system to replace the batteries.
Convenient installation of the motion sensor
The outdoor motion sensor for alarm is mounted on the SmartBracket mount, without harm to repair and without disassembling the sensor housing. The wireless device connects to the smart control panel via a mobile application.
To add a wireless motion sensor to the system, you need to scan the QR code with the Ajax application and assign a name and room to the device. Setting up the outdoor detector also takes place in real-time with detection and communication zones tests. You can turn off the outdoor motion sensor or reconfigure the system parameters without leaving the protected object.
Connection of a wireless detector to the Hub and ocBridge Plus and uartBridge integration modules is not provided. The security motion sensor works with Hub Plus, Hub 2, Hub 2 Plus and the ReX signal repeater.