United StatesTech specs
DoorProtect S Jeweller
Wireless opening detector with two reed switches. Superior edition
Compatibility
Control panels
Range extenders
Communication
Jeweller communication technology
Proprietary wireless communication technology to transmit commands, alarms, and events.
Key features:
- Two-way communication.
- Advanced sabotage protection.
- Block encryption featuring a dynamic key.
- Instant notifications.
- Remote configuration in the Ajax apps.
Frequency bands
868.0–868.6 MHz
Maximum effective radiated power (ERP)
up to 20 mW
Automatic power control to reduce power consumption and noise interference.
Radio signal modulation
GFSK
Radio signal range
up to 3,900 ft
Between detector and control panel (or range extender) in an open space.
Encrypted communication
All the data stored and transmitted are protected by block encryption with a dynamic key.
Frequency hopping
Radio communication uses frequency hopping to prevent interception and jamming.
Detection
Sensitive elements
2 reed switches
The magnet can be installed to the left or right side of the detector.
Magnets
small and big one come in the set
The small magnet operates at a distance of up to 0.4″
from the detector, and the big magnet — up to 0.8″
.
Protection against reed switch chattering
The detector ignores vibrations lasting up to 0.15 s.
Input to connect an additional detector
Wired detector with the normally closed (NC) contact type.
Chime
The siren makes a special sound to notify that the opening detectors are triggered when the system is disarmed.
Recommendations
Do not install the detector using both magnets at the same time. The detector recognizes only one magnet on one side of the detector — left or right.
The device is designed for indoor use only.
The device is designed for indoor use only.
Sabotage protection
Tamper alarm
Notifications on attempts to detach the detector from the surface or remove it from the mounting panel.
Holding screw
to secure the detector on SmartBracket
Protection against spoofing
device authentication
Communication loss detection
after 36 s
Detection time depends on the Jeweller or Jeweller/Fibra settings.
Power supply
Battery
1 × CR123A
Pre-installed.
Type
Type C
Calculated battery life
up to 7 years
Detector’s operating voltage range
2.1−3.3 V⎓
Detector’s nominal operating voltage
3 V⎓
Quiescent detector’s current consumption at nominal voltage
0.013 mA
Maximum detector’s current consumption at nominal voltage
10.5 mA
Full capacity
1,600 mAh
Low battery voltage
2.5 V⎓
Low battery recovery voltage
2.7 V⎓
End of life battery voltage
2.1 V⎓
Device is switched off.
End of life battery capacity
300 mAh
Manufacturer
Panasonic
Enclosure
Detector dimensions
4.05″ × 0.87″ × 0.83″
Dimensions of the big magnet
4.05″ × 0.87″ × 0.83″
Dimensions of the small magnet
2.15″ × 0.43″ × 0.24″
Detector weight
1.30 oz
Operating temperature range
from 14℉ to 104℉
Operating humidity
up to 75%
Protection class
IP50
Colours
Black
White
Complete set
DoorProtect S Jeweller
SmartBracket mounting panel with holding screw
CR123A battery (pre-installed)
Big magnet
Small magnet
Outside-mounted terminal clamp
Installation kit
Quick start guide