Tech specs
DoorProtect Plus Fibra
Wired combined opening, shock, and tilt detector with two reed switches and accelerometer
Devices compatibility
CheckCommunication
Fibra communication technology
Proprietary wired communication technology.
Fibra combines the reliability of wires with the freedom of radio connection.
It features:
- Two-way communication.
- Advanced anti-sabotage protection.
- Instant notifications.
- Remote configuration via the Ajax apps.
Line connection
4-core cable
Fibra line length
up to 6,500 ft
When using the U/UTP cat.5 twisted pair.
Encrypted communication
Detection
Sensing element
1 × accelerometer
2 × reed switch
The magnet can be installed to the right or left side of the detector.
Additional detector connection
Wired detector with the normally closed (NC) contact type.
Shock sensor sensitivity
3 levels
Adjusted by PRO or user with admin rights in the Ajax app.The detection radius depends on the material type:
- Framed glass window — 1.2 m (high sensitivity level), 1 m (low sensitivity level).
- Wooden plate — 1.2 m (high sensitivity level), 1 m (low sensitivity level).
- Concrete plate — 0.75 m (high sensitivity level), 0.5 m (low sensitivity level).
The smoother and cleaner the detection surface is, the better the detection radius is.
Option to ignore single shock
Enabled by PRO or user with admin rights in the Ajax app.
Tilt sensor activation threshold
from 5° to 25°
Adjusted by PRO or user with admin rights in the Ajax app.
Shock sensor sensitivity
Reed switch
Additional detector connection
Recommendations
Do not install the detector using both magnets at the same time.
The detector recognizes only one magnet on one side of the detector — left or right.
The device is designed for indoor use only.
Anti-sabotage protection
Tampering alarm
Alerts of attempts to detach the detector from the surface or remove the mounting panel.
Protection against forgery
Device authentication
Power supply
Detector’s operating voltage range
5−30 V⎓, up to 24 mW
The detector is powered by the control panel.
Detector’s nominal operating voltage
24 V⎓
Quiescent detector’s current consumption at nominal voltage
0.043 mA
Maximum detector’s current consumption at nominal voltage
1.55 mA
Enclosure
Dimensions
3.56″ × 0.83″ × 0.73″
Weight of the white device
0.6 oz
Weight of the black device
0.53 oz
Operating temperature range
from 14 °F to 104 °F
Operating humidity
up to 75%
Protection class
IP50, IK04
Colours
Black
White
Complete set
DoorProtect Plus Fibra
Big magnet
Small magnet
Installation kit
Quick start guide
Certification and compliance with standards
DoorProtect Plus Fibra
DoorProtect Plus Fibra
Compliance with the security alarm standards
Certificate issued by TREZOR TEST s.r.o.
EN 50131-1:2006/A1:2009/А2:2017/A3:2020
EN 50131-2-6:2008
EN 50131-2-8:2016
PD 6662:2017*
Security Grade (SG)
Certificate issued by TREZOR TEST s.r.o.
2
Restriction of Hazardous Substances (RoHS)
Test report issued by Shenzhen NTEK Testing Technology Co.
EN IEC 63000:2018
Electromagnetic Compatibility Directive (EMC)
Certificate issued by MiCOM Labs
EN 55032:2015+A11:2020
EN 55035:2017+A11:2020
Environmental class according to EN 50131
Certificate issued by TREZOR TEST s.r.o.
||
INCERT
Certificate issued by Kiwa Nederland B.V.
T 031:2017+A1:2018+A2:2022
PSTI UK
BSI Assurance UK Limited
Schedule 1