Language:

Tech specs

HomeSiren S Jeweller

Wireless siren. Superior edition

HomeSiren S Jeweller

Devices compatibility

Check

Communication

Jeweller communication technology

Proprietary wireless communication technology to transmit commands, alarms, and events.

Key features:

  • Two-way communication.
  • Advanced sabotage protection.
  • Block encryption featuring a dynamic key.
  • Instant notifications.
  • Remote configuration in the Ajax apps.

Frequency bands

868.0–868.6 MHz

Maximum effective radiated power (ERP)

up to 25 mW

Automatic power control to reduce power consumption and noise interference.

Radio signal modulation

GFSK

Radio signal range

up to 6,600 ft

Between siren and control panel (or range extender) in an open space.

Encrypted communication

All the data stored and transmitted are protected by block encryption with a dynamic key.

Frequency hopping

Radio communication uses frequency hopping to prevent interception and jamming.

Key features

Alarm type

acoustic and LED

Buzzer and LED.

Type of warning device

type W

Internal, self-powered.

Alarm volume

from 81 to 105 dB at a distance of 3.3 ft

Adjusted by PRO or user with admin rights in the Ajax app.

94 dB at a distance of 3.3 ft

Default settings.

Alarm duration

from 3 s to 3 min

Adjusted by PRO or user with admin rights in the Ajax app.

Siren sound frequency

3.4 ± 0.5 kHz

Ability to connect an additional LED

3 V⎓

An additional LED works in parallel with the built-in LED of the siren and fully replicates its indication.

Events indication

  • Alarms.
  • Delays when entering/leaving.
  • Security mode.
  • Security mode changing.
  • After-alarm indication.

Chime

The siren makes a special sound to notify that the opening detectors are triggered when the system is disarmed.

Recommendations

The siren is designed for indoor use only.
Recommended installation height is 8.2 ft and higher.

Sabotage protection

Tamper alarm

Notifications on attempts to detach the siren from the surface or remove it from the mounting panel.

Holding screw

to secure the siren on SmartBracket

Protection against spoofing

device authentication

Communication loss detection

after 36 s

Detection time depends on the Jeweller or Jeweller/Fibra settings.

Power supply

Batteries

2 × CR123A 3 V⎓ Lithium battery

Pre-installed.

Type

Type C.

Calculated battery life

up to 5 years

Siren’s operating voltage range

1.9−3.3 V⎓

Siren’s nominal operating voltage

3 V⎓

Quiescent siren’s current consumption at nominal voltage

42 µA

Peak siren’s current consumption at nominal voltage

1.1 A

When the siren sounds at the Very Loud volume level.

Average siren’s current consumption at nominal voltage

50 mA

When the siren sounds at the default volume level. Regardless of the arming mode.

Full capacity

3,200 mAh

Low battery voltage

2.1 V⎓

End-of-life battery voltage

1.9 V⎓

Device is switched off.

End-of-life battery capacity

366 mAh

Manufacturer

Panasonic

Enclosure

Dimensions

2.95″ × 2.99″ × 1.06″

Weight of the black device

3.25 oz

Weight of the white device

3.32 oz

Operating temperature range

from 14°F to 104°F

Operating humidity

up to 75%

Protection class

IP50, IK06

Colours

Black

White

Complete set

HomeSiren S Jeweller

SmartBracket mounting panel with holding screw

2 CR123A batteries (pre-installed)

Connector for LED indicator

Installation kit

Quick start guide

Certification and compliance with standards

HomeSiren S Jeweller

HomeSiren S Jeweller

Compliance with the security alarm standards

Certificate issued by TREZOR TEST s.r.o.

EN 50131-1:2006 / A1:2009 / А2:2017 / A3:2020

EN 50131-4:2019

EN 50131-5-3:2017

PD 6662:2017*

Security Grade (SG)

Certificate issued by TREZOR TEST s.r.o.

2

Radio Equipment Directive (RED)

Certificate issued by MiCOM Labs

EN 300 220-1 V3.1.1

EN 300 220-2 V3.2.1

Restriction of Hazardous Substances Directive (RoHS)

Test report issued by Shenzhen NTEK Testing Technology Co.

EN IEC 63000:2018

Electromagnetic Compatibility Directive (EMC)

Certificate issued by MiCOM Labs

EN 301 489-1 V2.2.3

EN 301 489-3 V2.1.1

Low Voltage Directive (LVD)

Certificate issued by MiCOM Labs

EN 62479:2010

EN 62368-1:2014+A11:2017

Environmental class according to EN 50131

Certificate issued by TREZOR TEST s.r.o.

||

INCERT

Certificate issued by Kiwa Nederland B.V.

T 031:2017+A1:2018+A2:2022

PSTI UK

Schedule 1

Additional information

Compliance with standards

Learn more

Warranty

24 months

Learn more

User manual

Learn more