Tech specs
GlassProtect S Jeweller
Wireless glass break detector with a microphone. Superior edition
Devices compatibility
CheckCommunication
Jeweller communication technology
Proprietary wireless communication technology to transmit commands, alarms, and events.
Key features:
- Two-way communication.
- Advanced sabotage protection.
- Block encryption featuring a dynamic key.
- Instant notifications.
- Remote configuration in the Ajax apps.
Frequency bands
868.0–868.6 MHz
Maximum effective radiated power (ERP)
up to 20 mW
Automatic power control to reduce power consumption and noise interference.
Radio signal modulation
GFSK
Radio signal range
up to 3,300 ft
Between detector and control panel (or range extender) in an open space.
Encrypted communication
All the data stored and transmitted are protected by block encryption with a dynamic key.
Frequency hopping
Radio communication uses frequency hopping to prevent interception and jamming.
Detection
Sensitive element
electret microphone
Glass break detection distance
from 1 to 29.5 ft
Glass break detection angles
horizontal: 180°
vertical: N/A
Sensitivity
3 levels
Adjusted by PRO or user with admin rights in the Ajax app.
False alarm prevention
DualTone
Two-factor glass break verification software algorithm: by low and high frequencies.
Input to connect an additional detector
Wired detector with the normally closed (NC) contact type.
Glass break characteristics
Minimum glass size
157″ × 157″
Detection distance is up to 29.5 ft for all glass types when the High sensitivity level is selected.
Type of glass and its thickness:
standard pane — 0.16″
insulated glass — 0.16″
tempered glass — 0.24″
Recommendations
The device is designed for indoor use only.
Sabotage protection
Tamper alarm
Notifications on attempts to detach the detector from the surface or remove it from the mounting panel.
Holding screw
to secure the detector on SmartBracket
Protection against spoofing
device authentication
Communication loss detection
after 36 s
Detection time depends on the Jeweller or Jeweller/Fibra settings.
Power supply
Battery
1 × CR123A
Pre-installed.
Type
Type C.
Calculated battery life
up to 7 years
Detector’s operating voltage range
2.1−3.3 V⎓
Detector’s nominal operating voltage
3 V⎓
Quiescent detector’s current consumption at nominal voltage
0.011 mA
Maximum detector’s current consumption at nominal voltage
2.5 mA
Full capacity
1,600 mAh
Low battery voltage
2.4 V⎓
Low battery recovery voltage
2.7 V⎓
End-of-life battery voltage
2 V⎓
End-of-life battery capacity
250 mAh
Manufacturer
Panasonic
Enclosure
Dimensions
4.05″ × 0.87″ × 0.83″
Weight
1.41 oz
Operating temperature range
from 14°F to 104°F
Operating humidity
up to 75%
Protection class
IP50
Colours
Black
White
Complete set
GlassProtect S Jeweller
SmartBracket mounting panel with holding screw
CR123A battery (pre-installed)
Outside-mounted terminal clamp
Installation kit
Quick start guide
Certification and compliance with standards
GlassProtect S Jeweller
GlassProtect S Jeweller
Compliance with the security alarm standards
Certificate issued by TREZOR TEST s.r.o.
EN 50131-1:2006 / A1:2009 / А2:2017 / A3:2020
EN 50131-2-7-1:2012 / A1:2014 / A2:2016
EN 50131-6:2017 / A1:2021**
EN 50131-5-3:2017
PD 6662:2017*
Security Grade (SG)
Certificate issued by TREZOR TEST s.r.o.
2
Radio Equipment Directive (RED)
Certificate issued by MiCOM Labs
EN 300 220-1 V3.1.1
EN 300 220-2 V3.2.1
Restriction of Hazardous Substances Directive (RoHS)
Test report issued by Shenzhen NTEK Testing Technology Co.
EN IEC 63000:2018
Electromagnetic Compatibility Directive (EMC)
Certificate issued by MiCOM Labs
EN 301 489-1 V2.2.3
EN 301 489-3 V2.1.1
Low Voltage Directive (LVD)
Test report issued by Shenzhen NTEK Testing Technology Co.
EN 62479:2010
EN 62368-1:2014+A11:2017
Environmental class according to EN 50131
Certificate issued by TREZOR TEST s.r.o.
||
INCERT
Kiwa Nederland B.V.
T 031:2017+A1:2018+A2:2022
PSTI UK
Schedule 1