MotionProtect S Plus Jeweller

Jeweller communication technology

Proprietary wireless communication technology to transmit commands, alarms, and events.

Key features:

• Two-way communication.
• Advanced sabotage protection.
• Block encryption featuring a dynamic key.
• Instant notifications.
• Remote configuration in the Ajax apps.

Frequency bands

868.0–868.6 MHz

Maximum effective radiated power (ERP)

up to 20 mW

Automatic power control to reduce power consumption and noise interference.

Radio signal modulation

GFSK

Radio signal range

up to 3,900 ft

Between detector and control panel (or range extender) in an open space.

Encrypted communication

All the data stored and transmitted are protected by block encryption with a dynamic key.

Frequency hopping

Radio communication uses frequency hopping to prevent interception and jamming.

Battery

1 × CR123A

Pre-installed.

Type

Type C.

Calculated battery life

up to 5 years

Detector’s operating voltage range

2.1−3.3 V⎓

Detector’s nominal operating voltage

3 V⎓

Quiescent detector’s current consumption at nominal voltage

0.019 mA

Maximum detector’s current consumption at nominal voltage

2.75 mA

Full capacity

1,600 mAh

Low battery voltage

2.5 V⎓

End of life battery voltage

2.1 V⎓

Device is switched off.

End of life battery capacity

300 mAh

Manufacturer

Panasonic

MotionProtect S Plus Jeweller

SmartBracket mounting panel with holding screw

CR123A battery (pre-installed)

Installation kit

Quick start guide