United StatesTech specs
MotionProtect U Jeweller
Wireless PIR motion detector
Device compatibility
CheckCommunication
Jeweller communication technology
Proprietary wireless communication technology to transmit commands, alarms, and events.
Key features:
- Two-way communication.
- Advanced sabotage protection.
- Block encryption featuring a dynamic key.
- Instant notifications.
- Remote control and configuration in Ajax apps.
Frequency bands
868.0–868.6 MHz
Maximum effective radiated power (ERP)
up to 20 mW
Automatic power control to reduce power consumption and radio interference.
Radio signal modulation
GFSK
Radio communication range
up to 1,700 m
Between the device and a hub (or a range extender) in an open space.
Encrypted communication
All stored and transmitted data is protected by block encryption featuring a dynamic key.
Frequency hopping
To prevent radio interference and jamming.
Detection
Sensitive element
1 × PIR sensor
Motion detection distance
up to 12 m
When installed at a height of 2.4 m.
Motion detection angle
horizontal: 88.5°
Motion detection speed
from 0.3 to 2.0 m/s
The direction of the detector lens should be perpendicular to an alleged intrusion path into the facility.
Sensitivity
3 levels
Adjusted by a PRO or a user with admin rights in Ajax apps.
Pet immunity
weight: up to 20 kg
height: up to 50 cm
False alarm prevention
SmartDetect
Software algorithm.
Temperature compensation
Effective motion detection at temperatures from −10 °C to +40 °C.
Recommendations
It is recommended to install the detector at a height of 2.4 m.
The device is designed for indoor use only.
Sabotage protection
Tamper alarm
Notifications on attempts to detach the detector from the surface or remove it from the mounting panel.
Holding screw
to secure the detector on SmartBracket
Protection against spoofing
device authentication
Communication loss detection
after 36 s
Detection time depends on the Jeweller/Fibra settings.
Power supply
Battery
1 × CR123A
Pre-installed.
Type
type C
Calculated battery life
up to 5 years
Operating voltage range
2.1−3.3 V⎓
Nominal operating voltage
3 V⎓
Quiescent current consumption at nominal voltage
19 µA
Maximum current consumption at nominal voltage
2.75 mA
Full battery capacity
1,600 mAh
Low battery voltage
2.5 V⎓
Low battery recovery voltage
2.7 V⎓
End-of-life battery voltage
2.1 V⎓
Device is switched off.
End-of-life battery capacity
300 mAh
Enclosure
Dimensions
110 × 65 × 50 mm
Weight of the white device
96 g
Weight of the black device
88 g
Operating temperature range
from −10 °C to +40 °C
Operating humidity
up to 75%
Protection class
IP50, IK04
Colors
Black
White
Complete set
MotionProtect U Jeweller
SmartBracket mounting panel with holding screw
CR123A battery (pre-installed)
Installation kit
Quick start guide
Certification and compliance with standards
MotionProtect U Jeweller
MotionProtect U Jeweller
Compliance with the security alarm standards
Certificate issued by TREZOR TEST s.r.o.
EN 50131-1:2006 / A1:2009 / А2:2017 / A3:2020
EN 50131-2-2:2021
EN 50131-6:2017 / A1:2021**
EN 50131-5-3:2017
Security Grade (SG)
Certificate issued by TREZOR TEST s.r.o.
2
Radio Equipment Directive (RED)
Certificate issued by MiCOM Labs
EN 300 220-1 V3.1.1
EN 300 220-2 V3.2.1
Restriction of Hazardous Substances Directive (RoHS)
Test report issued by Shenzhen NTEK Testing Technology Co.
EN IEC 63000:2018
Electromagnetic Compatibility Directive (EMC)
Certificate issued by MiCOM Labs
EN 301 489-1 V2.2.3
EN 301 489-3 V2.1.1
Low Voltage Directive (LVD)
Certificate issued by MiCOM Labs
EN 62479:2010
EN 62368-1:2014+A11:2017
Environmental class according to EN 50131
Certificate issued by TREZOR TEST s.r.o.
||
PSTI UK
BSI Assurance UK Limited
Schedule 1