Language:

Tech specs

CombiProtect Jeweller

Wireless IR motion and glass break detector with microphone

CombiProtect Jeweller

Devices compatibility

Check

Communication

Jeweller communication technology

Proprietary wireless communication technology to transmit commands, alarms, and events.

Key features:

  • Two-way communication.
  • Advanced anti-sabotage.
  • Block encryption featuring a dynamic key.
  • Instant notifications.
  • Remote control and configuration in Ajax apps.

Frequency bands

866.0–866.5 MHz
868.0–868.6 MHz
868.7–869.2 MHz
905.0–926.5 MHz
915.85–926.5 MHz
921.0–922.0 MHz

Depends on the sales region.

Maximum effective radiated power (ERP)

up to 20 mW

Automatic power control to reduce power consumption and radio interference.

Radio signal modulation

GFSK

Radio communication range

up to 3,900 ft

Between the device and a hub (or a range extender) in an open space.

Encrypted communication

All stored and transmitted data are protected by block encryption featuring a dynamic key.

Frequency hopping

To prevent radio interference and jamming.

Detection

Sensitive element

PIR sensor

Motion detection distance

up to 39 ft

When installed at the height of 7.9 ft.

Motion detection angle

horizontal: 88.5°

Motion detection speed

from 1 to 6.6 ft/s

The direction of the detector lens should be perpendicular to an alleged intrusion path into the facility.

Sensitivity

3 levels

Adjusted by a PRO or a user with admin rights in the Ajax app.

Pet immunity

weight: up to 44 lb

height: up to 1.6 ft

False alarm prevention

SmartDetect

Software algorithm.

Temperature compensation

Effective motion detection at temperatures from 14 °F to 104 °F.

ttx
ttx

Recommendations

It is recommended to install the detector at a height of 7.9 ft.

The device is designed for indoor use only.

Glass break detection

Sensitive element

electret microphone

Glass break detection distance

from 1 to 30 ft

Glass break detection angles

horizontal: 180°

Sensitivity

3 levels

Adjusted by a PRO or a user with admin rights in the Ajax app.

False alarm prevention

DualTone

Two-factor software algorithm for glass break verification by low and high sound frequencies.

ttx

Glass break characteristics

Minimum glass size

11″ × 11″

Detection distance is up to 30 ft or all glass types when the High sensitivity level is selected.

Glass types and their thickness:

  • standard pane — ⅛" and ⅜"
  • tempered glass — ⅛" and ⅜"
  • laminated glass — ⅛" and ½"
  • wired glass — ¼"
  • insulated glass — ⅛" and ¼"
  • annealed glass — ¹⁄16"

Caution

The device will not detect glass breaking if the glass is covered with shockproof, sunscreen, decorative, or any other film.

Sabotage protection

Tamper alarm

Notifications on attempts to detach the device from the surface or remove it from the mounting panel.

Protection against spoofing

device authentication

Communication loss detection

after 36 s

Detection time depends on the Jeweller or Jeweller/Fibra settings.

Power supply

Battery

1 × CR123A

Pre-installed.

Type

type C

Calculated battery life

up to 5 years

Detector’s operating voltage range

2.1−3.3 V⎓

Detector’s nominal operating voltage

3 V⎓

Quiescent detector’s current consumption at nominal voltage

38 μA

Maximum detector’s current consumption at nominal voltage

60 mA

Full battery capacity

1,600 mAh

Low battery voltage

2.5 V⎓

Low battery recovery voltage

2.7 V⎓

End-of-life battery voltage

2.1 V⎓

Device is switched off.

End-of-life battery capacity

300 mAh

Manufacturer

Huiderui or Duracell

Enclosure

Dimensions

4.33″ × 2.56″ × 1.97″

Weight

3.25 oz

Operating temperature range

from 14 °F to 104 °F

Operating humidity

up to 75%

Protection class

IP50

ttx
ttx

Colors

Black

White

Complete set

CombiProtect Jeweller

SmartBracket mounting panel

CR123A battery (pre-installed)

Installation kit

Quick start guide

Certification and compliance with standards

CombiProtect Jeweller

CombiProtect Jeweller

Compliance with the security alarm standards

Certificate issued by TREZOR TEST s.r.o.

EN 50131-1:2006 / A1:2009 / A3:2020

EN 50131-2-2:2017

EN 50131-6:2017

EN 50131-5-3:2017

EN 50131-2-7-1:2012

PD 6662:2017*

Security Grade (SG)

Certificate issued by TREZOR TEST s.r.o.

2

Radio Equipment Directive (RED)

Certificate issued by MiCOM Labs

EN 300 220-1 V3.1.1

EN 300 220-2 V3.2.1

Restriction of Hazardous Substances Directive (RoHS)

Test report issued by Shenzhen NTEK Testing Technology Co.

EN IEC 63000:2018

Electromagnetic Compatibility Directive (EMC)

Certificate issued by MiCOM Labs

EN 301 489-1 V2.2.3

EN 301 489-3 V2.1.1

Low Voltage Directive (LVD)

Certificate issued by MiCOM Labs

EN 62479:2010

EN 62368-1:2014+A11:2017

Environmental class according to EN 50131

Certificate issued by TREZOR TEST s.r.o.

II

FCC ID

Certification Issued Under the Authority of the Federal Communications Commission

2AX5VCOMBPR-NA

IC ID

Certificate issued by MiCOM Labs

26860-COMBPRNA1

CSA

CSA Group Testing & Certification Inc.

ANSI/UL 62368-1:19

CSA C22.2 No. 62368-1:19

Standard for Intrusion-Detection Units

UL LLC

UL 639

ULC S306 (Canada)

PSTI UK

BSI Assurance UK Limited

Schedule 1

Additional information

Compliance with standards

Learn more

Warranty

24 months

Learn more

User manual

Learn more