United StatesOBUbeD
LineSupply (75 W) Fibra
Module for additional power supply with 75 W power and two output Fibra lines
yA5lgs
9td1WlCommunication
Fibra communication technology
Proprietary wired communication technology combines the reliability of wires with the freedom of radio connection.
Key features:
- Two-way communication.
- Advanced anti-sabotage.
- Block encryption featuring a dynamic key.
- Instant notifications.
- Remote configuration in the Ajax apps.
Line connection
4-core cable
Connection
to any point of the Fibra line
LineSupply (75 W) can be installed after a hub, detector, keypad, siren, or another LineSupply. The module provides additional power to Fibra devices installed between the LineSupply (75 W) and the end of the line.
Wired connection range
- between the module and the hub — up to 6,500 ft;
- between the module and the last Fibra device on each line — up to 6,500 ft.
The maximum line length is relevant when using the U/UTP cat.5 twisted pair.
Encrypted communication
All stored and transmitted data are protected by block encryption featuring a dynamic key.
Line connection
Number of input lines
1
LineSupply (75 W) can be connected after any Fibra device.
Number of output lines
2
Fibra devices with a total power consumption of up to 30 W can be connected to each output line. LineSupply (45 W) Fibra version is also available, featuring less output power and one output line instead of two.
Cable length
up to 6,500 ft
For each output line between the module and the last Fibra device on the line when using U/UTP cat.5 twisted pair.
Galvanic isolation
Ensures that devices connected between the LineSupply (75 W) and the end of the line do not consume power from the hub.
Power supply
Main
100–240 V~, 50/60 Hz
Backup
12 V⎓ battery with a capacity from 7 to 18 Ah
Not included. When the main power is available, the backup battery is charged from the mains.
Power output
- per line — 30 W;
- to charge the backup battery — 15 W.
Recommendations
Power supply 100–240 V~.
The device is designed for indoor use only. Installation in Case C (260) or Case D (430) is recommended. The casing is sold separately.
Sabotage protection
Tamper alarm
LineSupply (75 W) has a connector to fasten the tamper board to the module. The tamper board is in Case that is sold separately.
Protection against short circuit on the line
Protection against overvoltage
on the Fibra signal lines
The module protects devices when voltage is applied to the signal terminals A, B.
Protection against spoofing
device authentication
Communication loss detection
after 36 s
Between the hub and LineSupply (75 W). It can be changed in hub settings.
Enclosure
Dimensions
6.3" × 3.35" × 2.09"
Weight
16.05 oz
Operating temperature range
from 14 °F to 104 °F
Operating humidity
up to 75%
Electric shock protection
Class III
Colors
Black
White
Complete set
LineSupply (75 W) Fibra
Power supply cable
Battery connection cable
Terminal adapter — 2 pcs.
Quick start guide