Country:
United States United States
Language:

Partner Portal
Assemble kit

Hub Jeweller

The Hub intelligent control panel is a key element of the Ajax security system. The device monitors operation of all Ajax detectors and immediately sends an alarm signal to the owner and the Central Monitoring Station.
Where to buy
  • Authentication to prevent forgery
  • Jamming detection and communication channels encryption
  • Tampering alarm
  • Security Grade
  • Compliance
Uses GSM or Ethernet to send alarms to the Central Monitoring Station and the owner
Sends a notification in case of electrical power loss and operates for up to 15 hours from battery backup
Checks the functionality of detectors at least every 12 seconds

Principle of operation

The device collects information on detector operation in an encrypted format, analyzes the data, and in case of alarm, notifies the system owner and the Central Monitoring Station in just milliseconds.

Features

The device uses Jeweller radio technology to monitor the detectors and ensure a quick response to danger. It switches the entire system to clear frequencies during jamming. The device is protected against viruses at software level.

Installation and set up

Ready to operate straight out the box. It is set using the mobile application, and the detectors are connected with just one click. It can be mounted in just a few minutes using the SmartBracket mount.

Principle of operation

The device collects information on detector operation in an encrypted format, analyzes the data, and in case of alarm, notifies the system owner and the Central Monitoring Station in just milliseconds.

Features

The device uses Jeweller radio technology to monitor the detectors and ensure a quick response to danger. It switches the entire system to clear frequencies during jamming. The device is protected against viruses at software level.

Installation and set up

Ready to operate straight out the box. It is set using the mobile application, and the detectors are connected with just one click. It can be mounted in just a few minutes using the SmartBracket mount.
Tech specs
Compliance with standards

Safe home and office automation

Boost the potential of your security system with scenarios to actively resist the threats it detects and automate your routines. Set up a Night mode activation on schedule; turn off all the office lights automatically by arming the system; program the outdoor lights to spotlight trespassers when they trigger an outdoor motion detector; or install a sustainable anti-flood system. The system continues to execute scenarios even if the connection with Ajax Cloud is lost.
  • Reactions to threats
  • Planned actions
  • Reactions to security mode change
Learn more

Which hub to choose?

Compare

Choose the most suitable Ajax set in 2 minutes

Tell us what you need to protect and we will put together a set of detectors and devices for your premises.
Start

Recommended products

FireProtect Jeweller

Wireless smoke & heat detector with sounder

HomeSiren Jeweller

Wireless indoor siren

LeaksProtect Jeweller

Wireless flood detector

Ajax Hub — smart control panel for security alarms

The control panel of the security alarm system is used to receive and then process signals from sensors for various purposes. The control panel is the primary device in the security system, which determines the functionality of the installed alarm. To choose a central, you need to decide on their main types and possible functionality.

The principle of operation of burglar alarm control panels

In the calm mode, the intrusion alarm control panel monitors the state of the security system sensors and connection lines. When an alarm occurs or a change in the parameters of the devices occurs, the control panels of the control panels send messages to the keypad indication panel or sounders. If the installed security system is connected to the central console of the security company, messages are sent there as well.

Types of control panels

The main difference between alarm control panels is the way they receive power.

Wired alarm control panels and wireless control panels

Wired devices require wiring. It is essential to lay down a device of this type for installation at the design stage of the room to maintain the integrity of the repair. The second type of control panel for signalling is wirelessly connected to the network via a radio channel. Wireless control panels are installed even in finished interiors while maintaining their appearance. Wireless communication of such control panels with alarm sensors is carried out using radio channels.

Signalling pannels according to the method of obtaining information

Some models of alarm control panels equipped with a GSM module report alarms via phone calls or SMS, depending on the settings. Some security systems activate an alarm signal using sirens.

Smart control panel for security alarm Ajax Hub

The Ajax Hub smart alarm control panel controls the accurate monitoring of all connected Ajax devices using the Jeweler radio protocol. It immediately sends an alarm signal to all users of the system and the security console. Jeweller radio technology allows you to monitor the operation of security system sensors at a distance of up to 2000 m, provided there are no obstacles. Jeweller translates the entire system to clean frequencies when jamming the radio signal. The performance of the sensors is checked by pings at least every 12 seconds. Ajax Hub collects information about the operation of connected sensors in encrypted form, after which it analyzes the received data and, in the event of an alarm, immediately informs system users about the danger and directly to the security console. To send alarms, Ajax Hub uses two communication channels: GSM or Ethernet for SMS messages, push notifications or phone calls, respectively. The device package includes:
  • The Ajax Hub itself.
  • A power cable.
  • An Ethernet cable to connect the hub to the Internet.
  • A mounting kit.
Ajax Hub installation and mounting The Ajax Hub control panel is installed on the SmartBracket mount, and the configuration is done using a mobile application through which sensors are connected. Before adjustment, the sensors, the response zone and the noise level are remotely tested.

Features of the Ajax Hub alarm control panel

  • The Ajax Hub central works up to 15 hours from the built-in backup battery.
  • Geofence technology reminds users to turn on the alarm when they leave the premises and turn it off when they return.
  • The Ajax Hub alarm control panel serves up to 100 devices.
  • The ability to connect video surveillance through cameras that support the RTSP stream.
  • It is possible to connect up to 50 users and a security company to the monitoring system.
  • The Ajax Hub signalling central keeps a history of all events marked by the system.
  • The Control panel notifies of the loss of external power as soon as a problem is detected.
  • The housing of the smart alarm control panel is protected against opening by a tamper. In case of an attempt to dismantle or damage the panel, the user will receive an incident message.
Application for access to the Enterprise API of the Ajax system
We provide access to the Enterprise API to large security and service companies already serving or planning to serve thousands of Ajax security systems.
All fields are required
Thank you! We have received your application.

Subscribe to Ajax newsletters

Spelling error report

The following text will be sent to our editors:

Send