United StatesTech specs
CombiProtect S Jeweller
Wireless combined IR motion and glass break detector with microphone. Superior edition
Devices compatibility
Compatibility
Control panels
Range extenders
Communication
Jeweller communication technology
Proprietary wireless communication technology to transmit commands, alarms, and events.
Key features:
- Two-way communication.
- Advanced sabotage protection.
- Block encryption featuring a dynamic key.
- Instant notifications.
- Remote configuration in the Ajax apps.
Frequency bands
868.0–868.6 MHz
Maximum effective radiated power (ERP)
up to 20 mW
Automatic power control to reduce power consumption and noise interference.
Radio signal modulation
GFSK
Radio signal range
up to 3,900 ft
Between detector and control panel (or range extender) in an open space.
Encrypted communication
All the data stored and transmitted are protected by block encryption with a dynamic key.
Frequency hopping
Radio communication uses frequency hopping to prevent interception and jamming.
Detection
Sensitive elements
PIR sensor
Motion detection distance
up to 39 ft
When installed at the height of 7.9 ft.
Motion detection angles
horizontal: 88.5°
Motion detection speed
from 1 to 6.6 ft/s
The direction of the detector lens should be perpendicular to an alleged intrusion path into the facility.
Sensitivity
3 levels
Adjusted by PRO or user with admin rights in the Ajax app.
Pet immunity
weight: up to 44 lb
height: up to 1.6 ft
False alarm prevention
SmartDetect
Software algorithm.
Temperature compensation
Effective motion detection at temperatures
from 14°F to 104°F.
Recommendations
It is recommended to install the detector at a height of 7.9 ft
The device is designed for indoor use only.
Glass break detection
Sensitive elements
electret microphone
Glass break detection distance
from 1 up to 29.5 ft
Glass break detection angles
horizontal: 180°
vertical: N/A
Sensitivity
3 levels
Adjusted by PRO or user with admin rights in the Ajax app.
False alarm prevention
DualTone
Two-factor glass break verification software algorithm: by low and high frequencies.
Glass break characteristics
Min size of the glass
157″ × 157″
Detection distance up to 29.5 ft for all glass types when the High sensitivity level is selected.
Type of glass and its thickness:
- standard pane — 0.16″
- insulated glass — 0.16″
Sabotage protection
Tamper alarm
Notifications on attempts to detach the detector from the surface or remove it from the mounting panel.
Holding screw
to secure the detector on SmartBracket
Protection against spoofing
device authentication
Communication loss detection
after 36 s
Detection time depends on the Jeweller or Jeweller/Fibra settings.
Power supply
Battery
1 × CR123A
Pre-installed.
Type
Type C.
Calculated battery life
up to 5 years
Detector’s operating voltage range
2.1−3.3 V⎓
Detector’s nominal operating voltage
3 V⎓
Quiescent detector’s current consumption at nominal voltage
0.034 mA
Maximum detector’s current consumption at nominal voltage
58 mA
Full capacity
1,600 mAh
Low battery voltage
2.5 V⎓
Low battery recovery voltage
2.7 V⎓
End of life battery voltage
2.1 V⎓
End of life battery capacity
300 mAh
Manufacturer
Panasonic
Enclosure
Dimensions
4.33″ × 2.56″ × 1.97″
Weight
3.24 oz
Operating temperature range
from 14℉ to 104℉
Operating humidity
up to 75%
Protection class
IP50
Colours
Black
White
Complete set
CombiProtect S Jeweller
SmartBracket mounting panel with holding screw
CR123A battery (pre-installed)
Installation kit
Quick start guide