Tech specs
Superior MegaHub
Hybrid control panel supporting photo verification. Works with up to 999 Fibra and Jeweller devices. Connectable via Ethernet, Wi-Fi, and two SIM cards (2G/3G/LTE).

Capacity
Ajax devices
up to 9991
Specifically, up to 10 range extenders.
1 The hub supports both devices with the new firmware version (i.e., with the “999-ready” label) and devices with the legacy firmware version. However, no more than 250 devices with the legacy firmware can be added to the hub. The remaining devices within the 999 limit must have the new firmware version.
Ajax NVRs
up to 36
Ajax cameras
up to 224 via Ajax NVRs and up to 492 standalone
Third-party IP cameras
up to 100 when using RTSP via SDK
up to 224 when using ONVIF via Ajax NVRs
Users
up to 1,000
- Any number of admin users within the hub limit.
- PRO accounts for installers.
- PRO accounts for installation and monitoring companies.
Automation scenarios
up to 100
- By alarm.
- By schedule.
- By arming/disarming.
- By temperature, humidity, CO2 concentration.
- By pressing Ajax Button.
- By actuating Ajax LightSwitch.
Security groups
up to 100
Rooms
up to 500
Event log
up to 1,000 events
Events are saved in non-volatile embedded flash memory.
Wired communication
Fibra communication technology
Proprietary wired communication technology to transmit commands, alarms, and events.
Key features:
- Two-way communication.
- Advanced sabotage protection.
- Instant notifications.
- Remote control and configuration via Ajax apps.
Line connection
4-core cable
Input
8 Fibra lines
Compatible with Fibra devices only.
Fibra line length
up to 6,500 ft
When the U/UTP cat.5 4×2×0.51 mm (24 AWG) cable with copper conductor is used.
Power supply of devices
up to 1.2 A per one Fibra line
up to 1.6 A in total for all Fibra lines
For all connected wired devices.
Output voltage range
22–25 V⎓
Topologies
- Beam (Radial wiring)
- Ring
- Tree
If the line breaks, the ring splits into two independent beams, allowing connected devices to continue operating normally, and the system notifies a monitoring company and users of the incident.
Device polling interval
12 to 300 s
Adjusted by a PRO or user with admin rights in Ajax apps.
Encrypted communication
All stored and transmitted data is protected by block encryption featuring a dynamic key.
Wireless communication
Superior Jeweller communication technology
Proprietary wireless technology for transmitting commands, alarms, and events. Superior Jeweller is an upgraded version of the Jeweller radio protocol for Superior devices, ensuring compliance with EN 50131 (Grade 3).
Key features:
- Two-way communication.
- Advanced sabotage protection.
- Enhanced block encryption featuring a dynamic key.
- Instant notifications.
- Remote control and configuration in Ajax apps.
Frequency bands
865.0–868.0 MHz
868.0–868.6 MHz
868.7–869.2 MHz
869.4–869.65 MHz
Maximum effective radiated power (ERP)
up to 25 mW
Automatic power control to reduce power consumption and radio interference.
Radio signal modulation
GFSK
Radio communication range
up to 6,500 ft
Between a hub and connected devices (in open space). The maximum range depends on the connected device.
Device polling interval
12 s to 300 s
Adjusted by a PRO or user with admin rights in Ajax apps.
Encrypted communication
All stored and transmitted data is protected with advanced encryption, ensuring both confidentiality and integrity.
Frequency hopping
To prevent radio interference and jamming.
Wings communication technology
Proprietary wireless communication technology to transmit large data packets.
Key features:
- Two-way communication.
- Advanced sabotage protection.
- Block encryption featuring a dynamic key.
- Data packet reload in case of transmission errors.
- Photo delivery check.
Frequency bands
865.0–868.0 MHz
868.0–868.6 MHz
868.7–869.2 MHz
869.4–869.65 MHz
Maximum effective radiated power (ERP)
up to 25 mW
Automatic power control to reduce power consumption and radio interference.
Radio communication range
up to 6,500 ft
Between a hub and connected devices (in open space). The maximum range depends on the connected device.
Encrypted communication
All stored and transmitted data is protected with advanced encryption, ensuring both confidentiality and integrity.
Frequency hopping
To prevent radio interference and jamming.
Recommendations
The device is designed for indoor and outdoor use if installed in Case E (395).
Communication channels
Ethernet
1 × 8P8C socket
Up to 100 Mbps.

Cellular
2 × micro SIM slot
Cellular bands
2G
GSM900/DCS1800 (B3/B8)
4G (LTE)
FDD B1/B3/B5/B7/B8/B20

Wi-Fi
802.11 b/g/n module
Up to 72 Mbps.
Automatic switching between communication channels
- Switching between SIM cards — up to 4 minutes.
- Switching between 4G and 2G networks on one SIM card — instantly.
- Switching between Ethernet, Wi-Fi, and a SIM card — instantly.
Communication channels prioritization
- Ethernet
- Wi-Fi
- Cellular connection
Communication channels work in parallel to increase system reliability. Most of the data is transmitted via Ethernet.
External antenna connectors
Jeweller
Wings
4G (LTE)
The system will notify users if ExternalAntenna is damaged. ExternalAntenna is sold separately.

Alarm transmission system categories
SP2, SP5, DP3
Control panel operation method
pass-through
Signaling security
S2
Substitution security.
Information security
I2
Encryption algorithm
AES 128
Notifications
Notification types
- Push notifications
- SMS
- Calls
Event types
- Alarms
- Video detections
- Malfunctions
- Armed modes
- System events
- Non-security alerts
- Automation devices
- Smart lock events
- Doorbell ringing
Notification types are configured individually for each user. Notifications can be customized for A–F schemes according to EN 50131 requirements.

Photo verification
Photo verification types
- By alarm
- By scenario
- On demand
- By schedule
- By arming/disarming
- By masking attempt
- By tamper alarm
- By magnetometer alarm
Photo delivery time
up to 9 s
By default.
Photo resolution
up to 960 × 720 pixels
Depends on the detector type.
Number of photos in a series
1 to 5
Monitoring
Supported protocols
- SIA DC-09 (SIA-DCS)
- SurGard (Contact ID)
- ADEMCO 685
- Other proprietary protocols
Event types
- System alarms and events
- Panic button coordinates
- Photo verification
Sabotage protection
Tamper alarm
The board has a connector for attaching a tamper board. The tamper board detects when the Ajax Case lid is opened and notifies of attempts to detach Ajax Case with the installed hub from the surface.
Protection against spoofing
device authentication
Frequency hopping
The hub sends notifications of jamming or connection loss with the devices to all users and the monitoring company.
Jamming detection
The hub analyzes the noise level in the channel and the communication quality with added devices and sends a notification within 30 seconds.
Power supply
Main power supply type
type A
Device operating AC voltage range
100–240 V, 50/60 Hz
From the main power supply. Maximum current consumption is up to 1.8 A.
Device operating DC voltage range
10.5–15 V⎓
Autonomous operation
up to 60 hours
Superior MegaHub with an 18 Ah backup battery can power a system with XXX wired devices for 60 hours. Wireless devices operate on batteries and do not require an additional power supply.
The Battery power saver feature allows extending the backup battery life.
Low battery voltage
11.7 V⎓
Low battery recovery voltage
12.7 V⎓
End-of-life battery voltage
10.5 V⎓
Superior MegaHub switches off.
Maximum output peak-to-peak ripple voltage
1.2 V⎓
Minimum backup battery energy level in the charged state
100%
Current consumption
Maximum at nominal voltage
220 mA
Quiescent at nominal voltage2
up to 178 mA
When GSM and Ethernet are enabled.
up to 170 mA
When Ethernet is disabled.
2 From the backup battery if the main power supply is lost.
Casing
Dimensions
15.55″ × 11.81″ × 4.33″
Weight of the device in a white casing
TBC
Weight of the device in a black casing
TBC
Operating temperature range
from −13 °F to 131 °F
Operating humidity
up to 95% without condensation
Protection class
IP40, IK06

Colors
Black

White

Complete set
Superior MegaHub
Power cable
Battery connection cable
Ethernet cable
Case E (395)
Installation kit
8 terminating resistors (120 Ω)
Quick start guide