What types of devices and detectors do Ajax integration modules support

Designation

Type

Note

NO

Normally open.

NC

Normally closed, without resistors.

EOL (NC with resistors)

Normally closed, with one resistor.

There are 3 states: OK, alert and shorted out.

EOL (NO with resistors)

Normally open, with one resistor.

There are 3 states: OK, alert and contacts damaged.

2EOL (NC with resistors)

Normally closed, with 2 resistors.

There are 4 states: OK, alert, tamper alarm and shorted out.

Available for MultiTransmitter Jeweller with firmware version 2.13 and later.

If MultiTransmitter Jeweller is added to Hub (2G) Jeweller, this connection type is not supported.

2EOL (NO with resistors)

Normally open, with 2 resistors.

There are 4 states: OK, alert, tamper alarm and contacts damaged.

Available for MultiTransmitter Jeweller with firmware version 2.13 and later.

If MultiTransmitter Jeweller is added to Hub (2G) Jeweller, this connection type is not supported.

3EOL (NC with resistors)

Normally closed, with 3 resistors.

There are 5 states: OK, alert, tamper alarm, malfunction and shorted out.

Available for MultiTransmitter Jeweller with firmware version 2.13 and later.

If MultiTransmitter Jeweller is added to Hub (2G) Jeweller, this connection type is not supported.

3EOL (NO with resistors)

Normally open, with 3 resistors.

There are 5 states: OK, alert, tamper alarm, malfunction and contacts damaged.

Available for MultiTransmitter Jeweller with firmware version 2.13 and later.

If MultiTransmitter Jeweller is added to Hub (2G) Jeweller, this connection type is not supported.