How to replace MotionCam (PhOD) Jeweller detector batteries

In order to replace the batteries:

1. Remove the detector from the SmartBracket mounting panel.

2. Turn off the device.

3. Remove 3 screws and take the back lid of the detector.

4. Replace the batteries with new CR123A batteries observing polarity. We recommend installing Panasonic CR123A Industrial Lithium Battery, 3 V (item model number — 4330203048, manufacturer — Indonesia) to ensure that the Ajax device operates for the calculated time. If other batteries are installed, the operating time may differ from the calculated time.

   Never install used or damaged batteries

5. Turn on the detector and check the battery status in the app.

   The battery status is not updated instantly but during the next polling of the devices (by default, every 36 seconds).