United States
Superior MegaHub is a hybrid control panel that works with up to 999 Fibra and Jeweller devices.
Increasing the limit to 999 devices requires system improvements on both the hub and device sides. Therefore, upgraded firmware versions have been developed for Fibra and Jeweller devices.
Devices manufactured with upgraded firmware have the “999 ready” label on their packaging. This means that you can add up to 999 devices to the hub without restrictions.
Devices manufactured earlier that do not have the “999 ready” label on their packaging and that support the DFU feature can download and install the upgraded firmware remotely. Once the upgraded firmware is installed, you can add up to 999 devices to the hub without restrictions.
Devices manufactured earlier that do not have the “999 ready” label on their packaging and do not support the DFU feature remain on legacy firmware.
Legacy devices do not reduce the overall system capacity. Each device occupies only its own slot, regardless of firmware type. At the same time, the number of legacy firmware devices is limited to a maximum of 250 per hub.
Thus, Superior MegaHub supports both devices with upgraded firmware (i.e., marked “999 ready” and updated via DFU) and devices with legacy firmware. However, no more than 250 devices with legacy firmware can be added to the hub. The remaining devices within the 999 limit must have upgraded firmware.
For example, if you add 1 device with legacy firmware to the hub, you can still add up to 998 devices with upgraded firmware.
If you try to add more than 250 devices with legacy firmware to the hub, you will receive a warning that the limit has been reached.
Superior MegaHub running OS Malevich 2.37 supports up to 250 Jeweller devices, including those with upgraded and legacy firmware. This is a temporary limit that will be removed in future updates.