Tech specs
Case D (430)
Casing for up to eight Ajax modules and two 18 Ah batteries
Devices compatibility
CheckDevices installation
Number of devices
up to 8
To install a different number of devices, select a model with the appropriate number of slots:
Compatible devices
With batteries up to 18 Ah
With battery up to 9 Ah. Installing the hub in Case D (430) does not meet the Grade (EN 50131) requirements. The compliant version will be available soon.
Plastic holders
Module Holder (type A)
Place the required number of Module Holder (type A) into the casing to accommodate LineSplit Fibra, LineProtect Fibra, and MultiRelay Fibra modules. The Case D (430) complete set includes a total of 4 holders. If you need more, additional holders can be purchased separately.
Module Holder (type B)
Place two Module Holder (type B) into the casing to accommodate the Hub Hybrid board. Holders are sold separately.
Plastic rails
to secure LineSupply Fibra
Slide LineSupply Fibra along the rails to remove it from the casing. No holders are required to secure the module.
Cable fasteners
to hold the cables together with ties
Bubble level
To check the inclination angle of the casing during installation.
Recesses for drilling
Ø32 mm, Ø40 mm, or Ø63 mm
Wider holes
To ensure that the casing is installed correctly, even if there are errors during installation.
Holders for batteries
up to 18 Ah
At the bottom of the casing.
Holding stripe
for the battery
To prevent accidental dislodgement of the battery.
Key features
Tamper board
Included in the Case complete set. The tamper board connects to the appropriate connector of one of the devices and protects the installed devices from sabotage.
Device rotation
by 180°
The devices in the casing can be rotated by 180°, providing two fixation options.
Holding screws
in the casing lid
Latches
to secure the lid during installation
The latches prevent the lid from falling off Case until it is secured with screws.
Recomendations
The device is designed for indoor use only. Case is produced in several versions.
Product
Dimensions
16.93″ × 15.75″ × 5.24″
Weight of the black Case
7.37 lb
Weight of the white Case
7.45 lb
Operating temperature range
from 14 °F to 104 °F
Operating humidity
up to 75%
Colours
Black
White
Complete set
Case D (430)
Tamper board
Holding stripe for a battery
Module Holder (type A) — 4 pcs.
Installation kit
Quick start guide
Certification and compliance with standards
Case D (430)
Case D (430)
Compliance with the security alarm standards
Certificate issued by TREZOR TEST s.r.o.
EN 50131-1:2006 / A1:2009 / А2:2017 / A3:2020
EN 50131-3:2009
Low Voltage Directive (LVD)
Test report issued by Shenzhen NTEK Testing Technology Co.
EN 60670-1:2005
Restriction of Hazardous Substances (RoHS)
Test report issued by Shenzhen NTEK Testing Technology Co.
EN IEC 63000:2018
Security Grade (SG)
Certificate issued by TREZOR TEST s.r.o.
3
Environmental class according to EN 50131
Certificate issued by TREZOR TEST s.r.o.
II