Hub Plus Jeweller

Ajax devices

up to 150

Specifically, up to 10 sirens or keypads with a built-in siren and 5 range extenders.

Ajax NVRs

up to 14

Ajax cameras

up to 224 via Ajax NVRs and up to 200 standalone

Third-party IP cameras

up to 10 when using RTSP via SDK

up to 224 when using ONVIF via Ajax NVRs

Users

up to 99

• Any number of admin users within the hub limit.
• PRO accounts for installers.
• PRO accounts for installation and monitoring companies.
• Access management for users.

Automation scenarios

up to 64

• By alarm.
• By schedule.
• By arming/disarming.
• By temperature, humidity, CO₂ concentration.
• By pressing Button.

Security groups

up to 25

Rooms

up to 50

Event log

up to 1,000 events

Events are saved on the non-volatile onboard flash memory.

Jeweller communication technology

Proprietary wireless communication technology to transmit commands, alarms, and events.

Key features:

• Two-way communication.
• Advanced anti-sabotage.
• Block encryption featuring a dynamic key.
• Instant notifications.
• Remote control and configuration in Ajax apps.

Frequency bands

• 866.0–866.5 MHz
• 868.0–868.6 MHz
• 868.7–869.2 MHz

Depends on the sales region.

Maximum effective radiated power (ERP)

up to 20 mW

Automatic power control to reduce power consumption and radio interference.

Radio signal modulation

GFSK

Radio communication range

up to 6,500 ft

Between a hub and connected devices (in an open space). Maximum range depends on the connected device.

Polling interval

from 12 to 300 s

Adjusted by a PRO or user with admin rights in Ajax apps.

Encrypted communication

All stored and transmitted data are protected by block encryption featuring a dynamic key.

Frequency hopping

To prevent radio interference and jamming.

Ethernet

1 × 8P8C socket

Up to 100 Mbps

Cellular

2 × micro SIM slot

Cellular bands

2G

GSM900/DCS1800 (B3/B8)

3G

WCDMA 900/2100 (B8/B1)

Wi-Fi

802.11 b/g/n module

Up to 600 Mbps

Automatic switching between communication channels

Instant switching between Ethernet, Wi-Fi, and SIM.
Instant switching between 3G and 2G networks of one SIM.
Switching between SIMs takes up to 4 minutes.

Communication channels prioritization

1. Ethernet
2. Wi-Fi
3. Cellular connection

Communication channels work in parallel to increase the system’s reliability.
Most of the data is transmitted via Ethernet.

Alarm transmission system categories

SP2, SP5, DP3

Control panel operation method

Pass-through

Signaling security

S2

Substitution security

Information security

I2

Supported protocols

• SIA DC-09 (SIA-DCS)
• SurGard (Contact ID)
• ​​ADEMCO 685
• Other proprietary protocols

Event types

• System alarms and events
• Panic button coordinates

Main power supply type

type A

Device operating AC voltage range

110–240 V~, 50/60 Hz

Up to 10 W of mains power consumption.

Backup power supply

built-in Li-ion rechargeable battery: 3.7 V⎓, 2 Аh

The hub has a 2-pin battery. To replace the hub battery, use the same one.

Autonomous operation

up to 16 hours

When Ethernet and Wi-Fi are disabled. The Battery Saver feature extends the battery life of the backup rechargeable battery up to 60 hours.

Alternative power supply

12 V⎓

Connected via a 12V PSU for Hub/Hub Plus/ReX alternative power supply unit, which is sold separately.

Tamper alarm

Notifications on attempts to detach the device from the surface or remove it from the mounting panel.

Protection against spoofing

device authentication

Frequency hopping

The hub sends notifications about jamming or losing connection with the devices to all users and the security company.

Hub Plus Jeweller

SmartBracket mounting panel

Power supply cable

Ethernet cable

Installation kit

SIM card (depends on the sales region)

Quick start guide