Language:

Tech specs

MotionCam (PhOD) Fibra

Soon to be: Superior MotionCam (PhOD) Fibra

Wired IR motion detector supporting photo by alarm, photo on demand, photo by schedule, and photo by scenario features

MotionCam (PhOD) Fibra

Devices compatibility

Check

Communication

Fibra communication technology

Proprietary wired communication technology. Fibra combines the reliability of wires with the freedom of radio connection.

Key features:

  • Two-way communication.
  • Advanced anti-sabotage.
  • Instant notifications.
  • Remote configuration in the Ajax apps.

Line connection

4-core cable

Fibra line length

up to 6,550 ft

When using the U/UTP cat.5 twisted pair cable.

Encrypted communication

Detection

Sensitive element

1 PIR sensor

Motion detection distance

up to 39 ft

When installed at the height of 7.9 ft.

* — 10 m according to INCERT (with high sensitivity level)

Motion detection angles

horizontal — 88.5°

Motion detection speed

from 1 to 6.6 ft/s

The direction of the detector lens should be perpendicular to an alleged intrusion path into the room.

Sensitivity

4 levels

Adjusted by a PRO or user with admin rights in the Ajax app.

Pet immunity

up to 44 lb
up to 1.6 ft in height

False alarm prevention

SmartDetect

Software algorithm.

Temperature compensation

Effective motion detection within 14°F to 104°F range.

ttx
ttx

Photo verification

Photo by Alarm

The built-in camera is activated if the detector is armed and motion is detected.

Photo on Demand

The user takes pictures at any time or when the detector is armed (depending on settings). The feature is disabled by default.

Photo by Scenario

The detector’s camera takes pictures automatically when other Ajax detectors are triggered. The feature is disabled by default.

Photo by Schedule

The detector automatically takes photos at a specified time. This feature is available for hubs (except Hub Jeweller) with firmware version OS Malevich 2.19 or higher.

Adjustable photo resolution

640 × 480 px
320 × 240 px (default)
160 × 120 px

Adjusted by a PRO or user with admin rights in the Ajax app.

IR backlight

For night photography and low light conditions.

Series of pictures

from 1 to 5 snapshots

Adjusted by a PRO or user with admin rights in an Ajax app.

Photo delivery

up to 7 s — 160 × 120 px resolution
up to 9 s — 320 × 240 px resolution
up to 20 s — 640 × 480 px resolution

Photo delivery time depends on the image resolution selected in the device settings.

Recommendations

It is recommended to install the detector at the height of 7.9 ft. The device is designed for indoor use only.

Anti-sabotage protection

Tamper alarm

2 tampers

Both are needed to fasten the left or right side of the detector’s mounting panel. The system receives notifications about attempts to detach the device from the surface or remove it from the mounting panel.

Protection against spoofing

device authentication

Main power supply

Fibra line power supply

7−30 V⎓, up to 120 mW

The detector is powered by the control panel.

Detector’s nominal operating voltage

24 V⎓

Quiescent detector’s current consumption at nominal voltage

0.569 mA

Maximum detector’s current consumption at nominal voltage

14.2 mA

Auxiliary power supply

Sealed battery

LTO AA

It is used when the detector takes photos, activates an IR backlight, and transmits an alarm. The battery is charged from the Fibra line.

Detector’s nominal operating voltage

2.4 V⎓

The detector is powered by the sealed battery.

Quiescent detector’s current consumption at nominal voltage

0.001 µA

Maximum detector’s current consumption at nominal voltage

568.7 µA

Enclosure

Dimensions

5.31" × 2.75" × 2.60"

Weight of the black device

4.97 oz

Weight of the white device

5.64 oz

Operating temperature range

from 14°F to 104°F

Operating humidity

up to 75%

Protection class

IP50

ttx
ttx

Colours

Black

White

Complete set

MotionCam (PhOD) Fibra

SmartBracket mounting panel

Installation kit

Quick start guide

Certification and compliance with standards

MotionCam (PhOD) Fibra

MotionCam (PhOD) Fibra

Compliance with the security alarm standards

Certificate issued by TREZOR TEST s.r.o.

EN 50131-2-2

EN 50130-4+A1

EN 50130-5

EN 50131-1

PD 6662:2017*

Security Grade (SG)

Certificate issued by TREZOR TEST s.r.o.

2

Restriction of Hazardous Substances Directive (RoHS)

Test report issued by Shenzhen NTEK Testing Technology Co.

EN 63000:2018

Electromagnetic Compatibility Directive (EMC)

Certificate issued by MiCOM Labs

EN 55032:2015+A1:2020

EN 55035:2017+A11:2020

Environmental class according to EN 50131

Certificate issued by TREZOR TEST s.r.o.

II

PSTI UK

BSI Assurance UK Limited

Schedule 1

Additional information

Compliance with standards

Learn more

Warranty

24 months

Learn more

User manual

Learn more