StreetSiren DoubleDeck Jeweller

StreetSiren DoubleDeck Jeweller

Wireless outdoor siren with a clip lock for a branded faceplate

Free promotion of security services

Security service providers can print their logo and contact information on the front panel of an outdoor siren. Located at the building, it will serve as an additional marketing channel that reaches new customers: neighbors and visitors.
StreetSiren DoubleDeck
Brandplate faceplate
StreetSiren DoubleDeck
StreetSiren DoubleDeck
Brandplate faceplate
Brandplate faceplate
To attract attention

To attract attention

StreetSiren DoubleDeck needs less than a second to activate a powerful siren and bright LED indicators in response to an alarm signal. Any break-in will be immediately exposed.
To indicate the system state

To indicate the system state

LED indication and short beeps of the buzzer remind users that premises are armed and delay when entering feature is active. The risk of a false alarm becomes significantly lower.

Right protection for every setting

StreetSiren DoubleDeck is flexible when it comes to settings which makes it as relevant in a quiet gated community as in a loud industrial area. The buzzer can be set to generate sound from 85 to 113 dB for an adjustable period: from 3 seconds to 3 minutes. Or it can be completely silent when the device is set to respond to alarm triggerings only with LED indication. The Ajax app allows engineers to choose detectors that activate the siren. It helps to prevent awkward situations when neighbors are notified every time that a washing machine leaks.
Buzzer loudness level up to
113 dB
Alarm duration length up to
3 minutes
Right protection for every setting

Weatherproof

StreetSiren DoubleDeck is resistant to heat, cold, and rapid changes in temperature. Its hermetically sealed body has been rated IP54 level of ingress protection. The outdoor siren is ready to withstand exposure to rains or snowfalls and can be installed on the exterior walls without a canopy.
Withstands heat up to
+50°С
Withstands cold up to
−25°С
Protected from dust and precipitation
IP54
Reacts to alarms in a split second

Reacts to alarms in a split second

We have developed the Jeweller radio protocol to ensure the uninterrupted operation of all devices within the security system. The Jeweller uses time frames to synchronize communication of connected devices, authentication to eliminate forgery, and encryption to protect against data leaks. Moreover, it allows devices to operate for years from pre-installed batteries. Thanks to Jeweller, StreetSiren DoubleDeck can respond to detector alarms in 0,3 seconds, even when hub is offline.
Two-way communication at a distance of up to
1,500 meters
Siren activation triggered by alarm in
0,3 second
Adjustable ping interval from
12 seconds
Protected from vandals

Protected from vandals

2.5 meters is an optimal height for installing an outdoor siren. It improves visibility, audibility, and makes the device less accessible to intruders. Still, if someone will try to tear the siren off, the accelerator will trigger an alarm. In any case, alarm monitoring company and users will be notified about sabotage, and vandals will be deterred by a loud sound of the buzzer.
Effortless maintenance

Effortless maintenance

Outdoor siren operates for 5 years on the pre-installed batteries and features external power terminals. Whether to use batteries as a primary power supply or a backup one is your choice. In any case, the system will notify you about the need for maintenance when the battery level will drain to 20%.

Installation without pitfalls

StreetSiren DoubleDeck was specifically designed to save engineers time on installation. QR-code helps to quickly add to the system. Configurations and tests are available in the app, all the time. Thanks to SmartBracket and pre-installed batteries the device doesn’t need to be disassembled before mounting. Brandplate can be adjusted quickly using a clip lock. To fix it extra firmly engineers can use a screw.
The device is added to the security system using a QR code
The device is mounted using SmartBracket without disassembling the body
Installation
The device is customized in the smartphone app
The device is added to the security system using a QR code
The device is customized in the smartphone app

How a company can order Brandplates

Brandplates are sold in batches — separately from StreetSiren DoubleDeck. One batch is 10 pcs. To place an order reach out to your regional Ajax distributor.

Free printing

Order 4 batches of Brandplates (40 pcs) or more in a single color to get free printing. Your design may include logo, company name and contact information: website or phone number.
Our partners

Go to Constructor

Free printing

Order 4 batches of Brandplates (40 pcs) or more in a single color to get free printing. Your design may include logo, company name and contact information: website or phone number.
Where to order

Choose the most suitable Ajax set in 2 minutes

Tell us what you need to protect and we will put together a set of detectors and devices for your premises.
Start

Recommended products

Faceplate for branding StreetSiren DoubleDeck

Advanced control panel with alarm photo verification support

Wireless outdoor motion detector with anti-masking and pet immunity

Wireless outdoor siren Ajax StreetSiren DoubleDeck

The installation of a street siren is needed for properties with an increased risk of intrusion to notify of unforeseen situations. The outdoor siren is used to prevent the intrusion of strangers into the territory with a loud sound and to alert others about other types of alarms — fire, leakage, etc.

The principle of operation of a street siren and the advantages of using the device

The principle of operation of a street siren resembles the operation of a speaker; the membrane vibrates after the current is applied due to magnetic vibrations — sound vibrations are created. The frequency and sound level of the siren depends on the generator and the characteristics of the membrane. The effect of attracting attention is enhanced by the operation of a device equipped with light and sound indicators. A siren that reports an alarm only by light is not always effective — from afar, the light of the device may not be noticed.

Depending on the purpose of the detectors, the following types of devices are distinguished:

  1. light annunciator;
  2. sound detector for signaling;
  3. siren;
  4. information board.

The types of sirens for alarms are as follows:

  • Type of installation — outdoor or indoor.
  • Type of notification — sound, light, light and sound.
  • Power type — 12V, 9-14V, 24V, 220V.
It is important to choose the right siren if the installation will be outdoor — with a strong case that will protect the device in all weather conditions. Devices of this type are additionally equipped with a tamper to prevent intruders from opening and dismantling.

Ajax StreetSiren DoubleDeck — outdoor detector for signaling

A feature of the StreetSiren DoubleDeck wireless outdoor siren is the ability for security or installation companies to customize the device and print a logo with contact information on the front panel, which is attached to the siren — Brandplate. This approach helps to attract new customers and additional advertising. The StreetSiren DoubleDeck outdoor detector takes less than a second to respond to an alarm and activate. The siren is triggered by a loud sound and bright LEDs, which will not leave the incident unattended. With the help of a buzzer beep and light indication, the siren reminds users that the object is under active protection. Flexible settings of StreetSiren DoubleDeck make the device appropriate both in a small quiet town and in a noisy industrial area. When the alarm is activated, the buzzer can work from 3 seconds to 180 with a power of 85 to 113 dB. Or not activated at all in the light alarm mode. Through the application, the user chooses which sensors the siren reacts to. The Ajax StreetSiren DoubleDeck outdoor siren works despite temperature changes, heat and cold. The siren for outdoor installation can be mounted on the facade of a building without a canopy, as it is protected from rain and snow. The sealed enclosure of the wireless device has been certified to IP54. The street siren maintains an uninterrupted connection with the hub by connecting to the Jeweler two-way radio protocol, which encrypts the transmitted data and protects the device from forgery. The Jeweler radio protocol allows devices to operate for years on supplied batteries. Even if the hub is offline, StreetSiren DoubleDeck responds to sensor alarms in 0.3 seconds thanks to Jeweler. The outdoor siren must be installed at a height of at least 2.5 meters for better visibility and audibility, as well as restricting unauthorized access to the device. If the wireless siren is nevertheless attempted to be dismantled or damaged, an alarm will be triggered, since the device is equipped with tamper against opening. The security company and users of the security system will instantly receive notifications of sabotage, and intruders will be frightened off by the howl of a siren. The siren for outdoor installation on the Ajax StreetSiren DoubleDeck alarm works up to five years from pre-installed batteries and is equipped with terminals for connecting external power. The user can choose whether the batteries will be the main power source or backup, but in any case, when the charge level drops to 20%, the security system will notify the owners.

Spelling error report

The following text will be sent to our editors: