Superior DoorProtect Fibra

The identifier (ID) is the serial number of the device. It can be found under the QR code on the device’s enclosure, board, and packaging.

ID at the bottom of the box

ID under the lid

The ID can also be found in the device states in Ajax apps:

1. Open an Ajax app and log in to your account.
2. Select the required space.
3. Go to the Devices tab.
4. Select the required device from the list. Device ID information is located at the bottom of the states menu.

The maximum length of a Fibra line is 2,000 meters.

However, the appropriate length for the wired line depends on the number and type of connected devices and the type of used cable.

Therefore, before installing wired devices, we recommend calculating the line length using an online calculator.

After installation, perform a Fibra signal strength test and a Lines power test to make sure the system functions properly.

Fibra devices are connected to the hub using Beam (Radial wiring), Ring, and Tree topologies.

As depicted in the diagram, wired devices should be connected to the Fibra line sequentially, one after the other, without any branching.

Line branching and the Tree topology are only allowed when using Superior LineSplit Fibra.

The Ring topology is also available. If the line breaks, the devices will still be connected to the hub via the Beam (Radial wiring) connection, continuing to transmit events and alarms to the hub.

We recommend connecting devices using the Ring topology if possible. This improves the sabotage protection of the line.

Keep in mind, the output lines created when using Superior LineSplit Fibra or Superior LineProtect Fibra don’t support the Ring topology.

Learn more