MotionCam (PhOD) Jeweller

Wireless motion detector taking photos by alarm and on demand

Where to buy

Adjustable image resolution

Two colours

Hassle-free installation

QR code

SmartBracket

App

Temperature compensation

Effective detection in the heat and the cold

IR backlight

for the photos in the dark

Software filter for false alarms

Photo verification in 9 seconds

without privacy concerns

Detection angles

Horizontal

Vertical

Pet immunity

Up to 20 kg / Up to 50 cm

10:17

CRITICAL

Ajax

Office: Motion detected, MotionCam in Hall

10:00

Ajax

Factory: MotionCam in Factory Floor is offline. Connection via Jeweller channel lost.

09:33

Ajax

Home: Device MotionCam removed

Data-rich notifications

Remote configuration and control

Up to 4 years

of operation from pre-installed batteries

Software filter for false alarms

IR backlight

for the photos in the dark

Remote configuration and control

Up to 4 years

of operation from pre-installed batteries

Detection

Intellect against false alarms

We have combined special optics with a software filter for false alarms in motion detectors. Along with a professional installation, it gives high detection accuracy.

The detector instantly captures human motion in the protected area.

The specially designed Fresnel lens provides the most informative thermal diagram.

SmartDetect software algorithm filters out false alarms.

Special lens

The pattern of the Fresnel lens sections is designed so that the diagrams of the infrared radiation of a human, an animal, and thermal noise have significant differences. Large sections of the lens capture radiation at the level of the head and torso of an adult. Smaller sections make the diagram more detailed. The MotionCam lens provides the detector with accurate information about the thermal object in the detection zone and the nature of its movement.

Professional installation

Installing the MotionCam in the right spot, at the optimum height, and perpendicular to the likely intrusion path ensures an informative thermal diagram. It significantly improves detection accuracy. Professional installation also makes the pet immunity feature more effective.

Filter for thermal interferences

The detector instantly analyzes the thermal diagram from the sensor: the infrared radiation intensity, the heat spot size, the motion speed, the time spent in the detection zone, and other parameters.

Ajax engineers have analyzed thousands of IR sensor triggerings caused by humans, animals, and thermal interference and developed SmartDetect. The software algorithm finds false alarm markers instantly and with high accuracy. As a result, the detector accurately responds to a human and does not bother the user with false alarms.

Heat spot size

Speed of movement

Infrared radiation intensity

False alarm

Real alarm

False alarm

Real alarm

False alarm

Real alarm

Temperature compensation

Temperature compensation is a software mechanism keeping the thermal diagram contrast even if the ambient temperature is close to the temperature of the human body.

With each ambient temperature measurement, the detector corrects the PIR sensor data according to the coefficient table stored in its memory. The detector is effective over the entire operating temperature range.

Sensitivity level

With the sensitivity setting, the detector adapts to the conditions of a particular room, considering possible thermal interference or pets. Changing the sensitivity setting affects the markers by which false alarms are filtered.

With low sensitivity, the detector is less likely to respond even to an active pet. And with high sensitivity, it will raise the alarm in case of any motion in the detection zone.

Sensitivity is configured in the Ajax app both on-site and remotely.

Photo verification

Peace of mind on demand

MotionCam (PhOD) needs only seconds to show the actual situation on the scene and dispel the user's doubts in case of an alarm. It takes a click in the Ajax app to take an on-demand photo. Also, the detector will automatically take a series of photos if it captures motion or when FireProtect 2 (Heat/Smoke) or FireProtect 2 (Heat/Smoke/CO) fire detector triggers.

Photo by alarm

Photo by scenario

Photo on demand

MotionCam Jeweller detectors require a Hub 2, Hub 2 Plus or Hub Hybrid control panel.

Advantages of photo verification

Loved ones and valuables are under care

In case of any doubts, the system users can check what is happening on the spot. There is no need to wait for an alarm. Just open the app, select the detector, and see the situation at home in seconds.

Less false calls for fire brigades

According to statistics, almost half of fire alarms are false. Visual verification of fire alarms has already become a worldwide practice. MotionCam automatically takes the photos of the premice when the FireProtect 2 (Heat/Smoke) or FireProtect 2 (Heat/Smoke/CO) detectors trigger. The fire brigade monitoring station can receive the photos and assess the situation in seconds.

Less concern

Up to 70% of false alarms happen when disarming the security system. With MotionCam, system users and monitoring company operators can verify in seconds whether an alarm is real and respond accordingly.

More security

Both system users and a rapid response team need to clearly understand what happens on the scene in case of an alarm. MotionCam shows how many intruders are armed and whether they are still in the room. This will help a security company patrol prepare, and the users avoid danger.

Evidence in a smartphone

A series of animated photos provide the law enforcers with the description of intruders, no time wasted. MotionCam will capture them even in complete darkness, thanks to the IR backlight. The chances of catching burglars in the act increase.

Jeweller

Protecting the most personal things

MotionCam Jeweller

MotionCam is also available without the Photo on demand and Photo by scenario functions. Such detectors take photos only in case of a motion-triggered alarm.

Learn more

Data protection

Privacy as a top priority

MotionCam is designed to control security, not privacy. Photos are protected from prying eyes at the detector, system and software levels.

Strict permission distribution

The special menu in the Ajax app helps accurately adjust access to visual data for users and security company operators: who and when can send a request for a photo, who can view the received pictures and streams from integrated surveillance cameras.

Encryption and GDPR

Graphic data is securely protected by encryption at each step of transmission and storage. Only hub users can access its virtual storage on Ajax Cloud and view photos taken by MotionCam detectors. The Ajax Cloud is located on geographically distributed servers in compliance with the General Data Protection Regulation (GDPR) requirements.

Detailed event log

Only users with access rights can view the photos in the system event log.

The event log stores the last 500 system events.

Only with Ajax

Unique wireless technologies

MotionCam Jeweller detector uses two radio protocols simultaneously: Jeweller to inform about alarms and Wings to transmit photos. Jeweller provides instant alarm delivery, while Wings delivers the first photo from the scene in just 9 seconds. Even with communication breakdowns and a weak signal. The communication range with the hub is up to 1,700 meters, so the detector can be easily installed where it will be the most effective.

Installation range up to 1,700 m

Photo delivery under 9 seconds

Two-way encrypted communication

Jeweller

Solution for a large-scale security

ReX 2

ReX 2 range extender doubles the radio range up to 3,400 meters, while photos to verify alarms can be transmitted via the Ethernet cable. Automatic signal strength adjustment and frame synchronization ensure that any number of system devices can be connected to ReX 2 without compromising communication reliability.

Ajax system supports connection of up to 5 range extenders with total coverage of up to 35 km².

More about ReX 2

Only with Ajax

Complex anti-sabotage

Communication loss detection in 36 seconds

The wireless devices polling frequency is adjusted by PRO or user with admin rights in the in-app hub settings. With a minimum interval of 12 seconds, the system takes 36 seconds to detect the communication loss with the device and notify the security company and system users.

Notification of dismantling

The detector enclosure is equipped with a tamper that detects an attempt to remove the device from the SmartBracket mounting panel or tear it off the surface.

Device authentication against fraud

For authentication, the hub checks the device's unique parameters during each communication session. If any parameter fails the check, the hub ignores device commands.

Data protection with encryption and hopping

All data that the system stores and transmits is protected by block encryption with a dynamic key. Radio transmission uses frequency hopping, which makes interception and jamming more difficult.

Notifying about events in 0.15 seconds

The monitoring station receives notifications on alarms and detector events in 0.15 seconds. The information includes time, device model and name, event type, and location room.

Jamming detection in 30 seconds

The hub analyzes the quality of communication with the system devices. If some data packets are lost, the control panel will change the transmission frequencies and inform the monitoring station about radio interferences.

Only with Ajax

Intuitive installation and connection

Add the MotionCam detector to the Ajax security system with a few taps. Open the Ajax app, scan the QR code and assign the detector to the room. There is no need to disassemble the detector enclosure. SmartBracket mounting panel allows you to securely install the detector on a flat surface or in a corner.

Connection

Installation

Setup

Adding to the system via QR code

SmartBracket mounting panel to install the device without dismantling

Configuration and testing in the mobile and desktop apps

Technical information

MotionCam (PhOD) Jeweller

Wireless motion detectors with photo verification in the security system

Motion sensors of the security system are designed to record the fact of unauthorized entry into the property under security. When the motion sensor is activated, its signal is transmitted to the alarm central via a wire or radio signal, depending on the type of system.

How motion sensors work

Motion sensors analyze microwave, ultrasonic, infrared and radio type radiation. If movement was noticed in the room, the sensor detects changes in the parameters of incoming waves and activates a certain reaction to the event. When triggered, the motion sensor sends data to the alarm control panel, informs the user, and initiates the activation of the siren.

Types of motion sensors

Motion sensors differ in:

The type of reaction to alarm: these are ultrasonic devices, infrared, microwave and combined type.
Place of installation: outdoor and indoor devices.
Data transmission method — wireless or wired system.
Wave processing and creation mechanism — active and passive models that process radiation at the input.

How to choose a motion sensor for a security system

In order to choose a motion sensor for alarming correctly, it is worth considering the features of the devices:

First you need to choose the type of installation of the motion sensor — on the wall or ceiling. With the choice of location, the installation engineer will best help.
The presence of immunity to animals, which helps to avoid false alarms on pets.
Energy consumption level — the amount of electricity that the sensor consumes.
The angle and radius of detection — this determines how large a territory the motion sensor can control.
Customizable — adjusting the weight and height of the object to which you want to respond.
The speed of the motion sensor's response to an alarm.
Case protected from opening and damage.

Wireless motion sensor from Ajax Systems — MotionCam (PhOD)

MotionCam (PhOD) is a wireless motion sensor from Ajax. MotionCam (PhOD) for indoor installation detects movement in a guarded room and allows you to take photos from the scene not only on alarm, but also on request. The MotionCam (PhOD) Jeweller motion sensor will show the current situation at the guarded object in seconds and dispel doubts in the event of an alarm. You can request a photo in one click in the Ajax application. Also, the sensor will automatically take a series of photos if it detects movement or a FireProtect 2 (Heat/Smoke) or FireProtect 2 (Heat/Smoke/CO) fire detector is triggered.

The principle of operation of the wireless motion sensor for MotionCam alarm (PhOD)

MotionCam indoor wireless motion sensor (PhOD) works with Ajax security system. The internal motion sensor communicates with the system control panel at a distance of up to 1700 meters, using two secure radio protocols — Jeweller for transmitting events and alarms and Wings. The second protocol is responsible for the transfer of photo data from the scene. MotionCam (PhOD) Jeweller is a wireless indoor motion sensor with photo verification support. The device detects movement in a guarded room using an IR sensor and detects moving objects with a temperature close to that of a human body. After the sensor detects movement, the built-in camera takes a series of pictures. Thus, the user can evaluate the event in dynamics. When the MotionCam wireless motion detector (PhOD) is triggered, the event is transmitted to the security system control panel, which starts scripts, turns on sirens, informs users and the security company about the alarm. Each MotionCam (PhOD) Jeweller motion sensor is recorded in the notification feed of the Ajax application. The alarm message also contains the room in which the sensor was triggered, the name of the control panel and the name of the device.

Photo on request

The MotionCam Motion Sensor (PhOD) Jeweler allows users to take pictures using the built-in cameras. Using the function, you can check the situation at the facility or simply monitor the condition of the house. Depending on the settings, a photo can be taken at any time or when motion sensors with alarm photo verification are armed. By default, Photo on Demand is disabled for system users. Users with the right to manage privacy settings (control panel settings, Privacy item) determine who can take and view on-demand photos, as well as which photo-verified sensors can be used for shooting. PRO-users of the system cannot manage privacy settings, but can take photos on demand if they have been granted such a right. Privacy settings do not apply to photos taken by sensors during an alarm. Event photos can be seen by all system users who have access to the system control panel's event feed.

Photo according to the scenario

The "Photo by scenario" function allows you to create a scenario for motion sensors of the MotionCam series, according to which they will take pictures when other Ajax devices are alarmed. By default, Scripted Photo is disabled for all motion sensors. The feature can be enabled by a user with access to privacy settings. Users of PRO applications cannot manage privacy settings, but they can grant this right to system users. In the system settings, you can also specify when the photo-verified sensor can take pictures according to the scenario: when the MotionCam (PhOD) Jeweler is armed or at any time. Scenario photos are available to all users of the security system who have access to the event feed. A photo event when other devices are alarmed is sent to the control panel of the security company.

Photo according to the scenario

Features of MotionCam Wireless Indoor Motion Detector (PhOD)

The MotionCam motion sensor (PhOD) has a number of the following features:

Working with Jeweler and Wings data transfer protocols

The sensor uses Jeweler technology for alarm and event transmission, and Wings for photo transmission. These are two-way wireless communication protocols that provide fast and reliable communication between a system control panel or repeater and connected system devices. The protocols support floating-key block encryption and device recognition at every communication session to prevent sabotage and sensor substitution. It is possible to control communication with system devices and their statuses in Ajax applications thanks to the central sensor polling system with a frequency of 12 to 300 seconds. The polling frequency is set by the user or PRO with administrator rights individually.

Photo delivery time

The alarm message is transmitted instantly. The time it takes for images to be delivered to the Ajax application depends on the Wings signal strength, Internet connection speed, image resolution, and connection to a repeater.

False alarm filter

In motion sensors, special optics are combined with a software false alarm filter, which, in combination with a professional installation, ensures high detection accuracy. The Fresnel lens in the design of the device provides the most informative thermal diagram. SmartDetect software algorithm filters out false alarms.

Data protection

The MotionCam (PhOD) Jeweler wireless motion sensor monitors the safety of system owners. Photo confirmations are protected from strangers at the level of the sensor, the security system and the Ajax application.

Thermal noise filter

The MotionCam (PhOD) Jeweler motion sensor instantly analyzes the thermal diagram read by the sensor: movement speed, time spent in the detection zone, infrared radiation intensity, heat spot size and other parameters.

Temperature compensation

Temperature compensation is a software mechanism that allows you to keep the thermal pattern contrast even if the temperature in the armed room is close to the temperature of the human body.

Motion Sensor Sensitivity Setting

Sensitivity adjustment allows you to adapt the sensor to the conditions of a particular room: pets, possible thermal interference. Increasing or decreasing sensitivity affects the false alarm filter. With the high sensitivity of the motion sensor configured, the device will react to any movement in the detection zone. If the sensitivity is low, the sensor is less likely to respond even to an active pet. Sensitivity is configured in the Ajax application remotely or on site.

Installation and configuration of the Ajax motion sensor

To install the sensor, you should use the services of an installation company. Ajax device installation services are provided by accredited partners. MotionCam Jeweler connects to the Ajax security system after scanning the QR code on the device body. The sensor housing does not need to be disassembled. The SmartBracket mounting plate allows you to mount the wireless sensor on a flat surface or in the corner of a room. Mounting the MotionCam Wireless Motion Detector (PhOD) at the optimum height in the correct location and perpendicular to the likely path of intrusion into the premises ensures an informative thermal diagram. Proper installation of the device significantly improves the accuracy of alarm detection. Professional installation also enhances the effectiveness of the sensor's immunity to animals.