Tech specs
DoorProtect Plus Jeweller
Wireless combined opening, shock and tilt detector with reed switch and accelerometer

Compatibility
Communication
Jeweller communication technology
Proprietary wireless technology to transmit alarms and events.
Features:
- Two-way communication.
- Advanced anti-sabotage.
- Block encryption featuring a dynamic key.
- Instant notifications.
- Remote configuration via the Ajax apps.
Radio frequency bands
- 866.0 – 866.5 MHz
- 868.0 – 868.6 MHz
- 868.7 – 869.2 MHz
- 905.0 – 926.5 MHz
- 915.85 – 926.5 MHz
- 921.0 – 922.0 MHz
Depends on the sales region.
Maximum effective radiated power (ERP)
up to 20 mW
Radio signal modulation
GFSK
Radio communication range
up to 3,900 ft
Between the detector and a hub (or radio signal range extender) in an open space.
Encrypted communication
All the data stored and transmitted are protected by block encryption with a dynamic key.
Frequency hopping
To prevent radio interference and radio signal interception.
Detection
Sensitive elements
1 × accelerometer
1 × reed switch
1 × reed switch
The magnet should be installed to the right of the detector.
Maximum number of openings
up to 2,000,000
For each reed switch.
Additional detector connection
Third-party wired detector with the NC (normally closed) contact type.
Shock sensitivity
3 levels
Adjusted by a PRO or user with admin rights in the Ajax app.
Option to ignore single shock
Adjusted by a PRO or user with admin rights in the Ajax app.
Tilt sensor activation threshold
from 5° to 25°
Adjusted by a PRO or user with admin rights in the Ajax app.


Recommendations
The magnet is mounted to the right of the detector. It can be placed horizontally.
Do not install the detector with the LED indicator facing down, as this may cause it to fall and fail due to damage.
Device is designed for indoor use only.
Do not install the detector with the LED indicator facing down, as this may cause it to fall and fail due to damage.
Device is designed for indoor use only.
Anti-sabotage protection
Tamper alarm
Notifications of attempts to tear off the detector from the surface or remove it from the mounting panel.
Protection against spoofing
Device authentication
Power supply
1 × CR123A battery
Up to 5 years of battery life.
Enclosure
Dimensions
Ø 0.79″ × 3.54″
Weight
1.02 oz
Operating temperature range
from 14 °F to 104 °F
Operating humidity
up to 75%
Protection class
IP50


Colours
Black

White

Complete set
DoorProtect Plus Jeweller
SmartBracket mounting panel
CR123A battery (pre-installed)
Big magnet
Small magnet
Terminal to connect a third-party detector
Installation kit
Quick Start Guide