Transmitter
-
Security Grade
-
Compliance
Principle of operation
Features
Installation and set up
Principle of operation
Features
Installation and set up
Tech specs
Outdoors
in sealed box or inside the detector casing
Normally open (NO)
Bistable
Normally open (NO)
Fire
Medical help
Panic button
Gas alarm
Malfunction
Leakage
Custom
If the Custom type of the event is selected, notifications about it will not be sent to the security company's control panel and via SMS to system users.
Learn more
pre-installed
up to 1,600 m
in an open space
Two-way communication between devices
Radio frequency bands:
866.0 – 866.5 MHz
868.0 – 868.6 MHz
868.7 – 869.2 MHz
905.0 – 926.5 MHz
915.85 – 926.5 MHz
921.0 – 922.0 MHz
depends on the sales region
Maximum effective radiated power (ERP)
up to 20 mW
Block encryption with a dynamic key
Device polling interval
12−300 s
Learn more about Jeweller
The temperature is displayed in the device states in the Ajax apps.
Jamming detection
Accelerometer
Tamper terminals
3 × CR123A battery (pre-installed)
Installation set
Quick Start Guide
Choose the most suitable Ajax set in 2 minutes
Recommended products
Ajax Transmitter integration module for alarm
Modern security systems require the use of modern communication devices capable of performing complex tasks. An Ajax Transmitter integration radio module operates at 868.0-868.6 MHz to connect a wired sensor from any manufacturer to the control panel.
The Ajax Transmitter integration module interacts with the Ajax intelligent control panel in line of sight up to 1600 meters. The signal transmission is protected from data forgery. The alarm control panel tests the device for operability. The frequency of the test poll is set between 12 and 300 seconds.
Three CR123A batteries power the Ajax Transmitter wireless integration module. There are alarm terminals and tamper TAMP (NO / NC) inputs on the device board. Terminals +/- are provided for the power supply to the connected wired sensor. The installed accelerometer responds to disassembly attempts and protects the transmitter from failure and damage.
The alarm integration module is installed inside the detector housing, and in case of lack of free space, separate housing is used, which transmits radio signals. The wireless transmitter should be installed taking into account the allowable air temperature -25°С ~ + 50°С, indoors.
Assign a wireless integration module to the Ajax Transmitter security system
Ajax signalling transmitter connects third-party detectors to Ajax Systems wireless security systems. Together with other Ajax devices, the Transmitter wireless integration module increases comfort and security, ensuring reliable operation of security and fire alarms and intelligent home systems.
Features of the Ajax Transmitter wireless alarm transmitter
Ajax Transmitter communicates via the Jeweller radio protocol with the control panel (Hub, Hub Plus). It is to the control panel that the alarm signal is received when the sensor connected by NC / NO contacts are activated.
With an optional connector, the wireless integration module can be combined with gas and water leak sensors, outdoor or indoor motion sensors, glass breakage, vibration, opening, thermal relays, and other leading third-party security devices, making them full-fledged Ajax devices. For alarm.
Protection against external interference
The security system’s control panel receives information from the wireless module Ajax Transmitter in encrypted form by the AES algorithm. In the case of signal jamming detection, the user receives an event message, and the system changes the frequency to free. Due to two-way communication, the control panel constantly checks the Transmitter integration module every 12-300 seconds.
Two-way Jeweler technology provides instant sending of alarms that are protected from interception and substitution by intruders, communication interference and jamming. Ajax Transmitter meets the requirements of the Grade 2 certificate of reliability.
Built-in motion sensor — accelerometer, serves as a means of protection against dismantling the transmitter by attackers. When you try to remove the integration module from the mount, the security user will receive an alarm message. The Transmitter will also notify the alarm control panel that the tamper of the connected sensor has tripped when its housing is opened.
Work without battery replacement
Thanks to Jeweler’s energy-efficient radio technology, Ajax devices can work without replacing the battery for several years. The life of the Ajax Transmitter wireless integration module from complete batteries is up to 5 years.