United StatesThe magnet is too far away from the reed switch. Re-install the magnet closer to the sensor or use a larger magnet. Magnets should be installed parallel to the main unit, on the right side.
DoorProtect Plus Jeweller
Wireless reed-switch opening detector with shock and tilt sensors
FAQ
After closing the door and activating the detector, there’s a notification to re-close the door
Which side should the magnet be installed on
Magnets must be installed parallel to the main unit, on the right side. There is a special mark on the detector that shows where magnet should be placed. Small magnet works at a distance up to 1 cm from the detector, while big one – up to 2 cm.
Can I connect a wired siren to the external contact of the Ajax opening detectors
No, you can not connect a wired siren to the external contact of opening detectors:
The external terminal is a digital input, not a power output.
The third-party wired siren can be connected to Relay Jeweller and Superior MultiRelay Fibra.
