DoorProtect Plus

Wireless opening detector notifies of first signs of intrusion into the room through the door or window. It is installed even on roof windows which can be left open when leaving the house.
  • Authentication to prevent forgery
  • Jamming detection and communication channels encryption
  • Tampering alarm
  • Security Grade
Operates up to 5 years without battery replacement
Registers change in vertical slope angle, bangs and vibration
External contact is available for connecting third-party detectors

Principle of operation

The device detects the door or window being opened by means of British-made hi-end reed switches on which the magnetic field acts. It can operate in the transmitter mode, sending a signal from the wired sensor to the hub.

Features

The device protects even windows left open for ventilation. The accelerometer registers changes in vertical slope angle, bangs or vibration and sends an alarm to the hub.

Installation and set up

Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.

Principle of operation

The device detects the door or window being opened by means of British-made hi-end reed switches on which the magnetic field acts. It can operate in the transmitter mode, sending a signal from the wired sensor to the hub.

Features

The device protects even windows left open for ventilation. The accelerometer registers changes in vertical slope angle, bangs or vibration and sends an alarm to the hub.

Installation and set up

Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.

Tech specs

Classification
Combined point magnetic contact and vibration radio channel security detector
Type of detector
Wireless
Installation method
Indoors
Compatibility
Operates only with HubHub PlusHub 2 and ReX
Sensing element
Reed switch, accelerometer
Alarm signal delivery time
0.15 s
Activation threshold
Small magnet — 1 cm
Big magnet — 2 cm
Tilt: more than 5°
Power supply
Battery: CR123A battery
Power supply voltage: 3 V
Battery life — up to 5 years
Jeweller radio technology
Communication range with central unit — up to 1,200 m in an open space
Two-way communication between devices
Operating frequencies — 868.0 - 868.6 MHz
Self-adjusting RF output power — up to 20 mW
Block encryption based on AES algorithm
Detector polling period — 12−300 s

Learn more about Jeweller >
Temperature sensor
Available
Operating temperature range
From -10°С to +40°С
Permissible humidity
Up to 75%
Anti-sabotage
Protection against fraud
Jamming detection
Tamper-resistant
Remote setting and testing
+
Dimensions
Diameter: 20 mm
Height: 90 mm
Weight
29 g
Certification
Grade 2, CE
Warranty
Replacement and repair within 24 months of the date of sale. Batteries are not covered under warranty.
Complete set
DoorProtect Plus opening detector
SmartBracket mounting panel
Two magnets
CR123A battery (pre-installed)
External contact
Installation set
User's guide

Choose the most suitable Ajax set in 2 minutes

Tell us what you need to protect and we will put together a set of detectors and devices for your premises.
Start

Recommended products

Wireless smoke & heat detector with sounder

Wireless indoor siren

Wireless flood detector

Spelling error report

The following text will be sent to our editors: