Wired siren with an LED connector
The identifier (ID) is the serial number of the device. It can be found under the QR code on the device’s enclosure, board, and packaging.
ID at the bottom of the box
ID under the lid
The ID can also be found in the device states in Ajax apps:
By alarm, the siren sounds from 3 seconds to 3 minutes. In the Ajax apps, you can set the duration and volume of the alarm, as well as determine which detectors will activate the siren.
Alarm duration of up to 15 minutes is only available for HomeSiren Jeweller, StreetSiren Jeweller, and StreetSiren DoubleDeck Jeweller with firmware version NA 5.60.4.14 and higher. For StreetSiren Jeweller and StreetSiren DoubleDeck Jeweller, an alarm duration exceeding 3 minutes is only available when the volume level is set to Quiet or Loud.
The maximum length of a Fibra line is 2,000 meters.
However, the appropriate length for the wired line depends on the number and type of connected devices and the type of used cable.
Therefore, before installing wired devices, we recommend calculating the line length using an online calculator.
After installation, perform a Fibra signal strength test and a Lines power test to make sure the system functions properly.
United States
