United States
FireProtect 2 AC (CO) Jeweller
Wireless mains-powered fire detector with CO sensor
Product is not available in your region
Against invisible threats
FireProtect 2 AC is a mains-powered detector designed for residential fire safety. The carbon monoxide sensor alarms before the concentration level becomes threatening. Everything meets the latest fire safety standards. Thought-out design, improved mounting panel with WAGO 221 connectors, and in-app settings make the installation process nice and easy, giving an ultimate experience for PRO.
Discover FireProtect 2 AC (CO) Jeweller
Wireless mains-powered fire detector with CO sensor
Watch on YoutubeKey features
Two types of interconnected fire alarm
Primary: via an Ajax hub, an alarm in 20s
CO sensor
with a 10-year service life
SmartBracket
with an adjustable rotation angle
Easy wiring
with WAGO 221
Main power supply
110–240 V~
Backup battery
85 dB built-in siren
Jeweller radio communication
Remote control and configuration
Operates as part of the Ajax system or without pairing with an Ajax hub
Informative in-app notifications
Ajax
Home: critical carbon monoxide (CO) level detected FireProtect 2 in Kitchen. Leave the premises immediately.
Ajax
Home: Photo by scenario taken, MotionCam (PhOD) in Kitchen
Two colours
Up to 1,500 m
range of communication with an Ajax hub
Wherever there is a risk of CO poisoning
Kitchen
Workshop
Home office
Bedroom
Discover future-proof hardware
Protects from invisible danger
Carbon monoxide (CO) is colorless, odorless, and otherwise imperceptible without a carbon monoxide detector, so poisoning can occur unnoticed. Even low concentrations can be enough to have a negative health impact, especially on those with chronic illnesses, pregnant, the elderly, and young children. High-level exposure can cause permanent damage or even death in a very short period of time. FireProtect 2 AC warns about a dangerous CO concentration at the level of 50 ppm before even the first signs of poisoning occur. A built-in chemical sensor is responsive to low concentrations and can accurately detect the CO level straight up to 10 years.
CO alarm
- 50 ppm in no more than 90 minutes
- 100 ppm in no more than 40 minutes
- 300 ppm in no more than 3 minutes
Stable performance for a decade
The detector is powered by 110–240 V~ mains and has a sealed battery to serve as a backup. Even in a power outage, the detector keeps operating smoothly. Designed for the quick and reliable fire detection over its 10-year lifespan.
Always informed, everywhere
For residential fire alarm systems, informing people about fire danger is the priority. FireProtect 2 is equipped with a powerful 85 dB siren to eliminate the risk of missing an alarm. The detector uses impossible-to-ignore tones with different patterns to indicate an alarm or event, so it’s easy to recognize the type of threat and react accordingly.
Different sound and LED indications
Dangerous CO level
Malfunction
Low battery level
End of life
Enhanced wireless interconnection
All FireProtect 2 AC detectors can synchronously notify about the fire alarm in two ways: primary and fallback . In case of danger, the initiating detector sends a fire alarm to the hub. The hub initiates the primary interconnect: all fire detectors will activate the built-in sirens in 20 seconds — three times faster than the fire standard requires. All information is immediately available in Ajax apps: initiating detector’s location, alarm type, and exact time. If there is no connection with the hub, the initiating detector activates the fallback interconnection bydirectly sending the alarm to other fire detectors. It takes only 1 minute to raise an alarm.
20 seconds to activate up to 200 fire detectors
Less than a minute to activate up to 50 fire detectors
Unleash the Ajax power
The Ajax smart and complex ecosystem brings new standards to the fire safety industry. FireProtect 2 AC is ready to protect your home without an Ajax hub but can do even more when connected to it. Intuitive Ajax apps provide remote setup and all detector information in real-time from anywhere the Internet is available, on a smartphone or PC. With instant notifications, there is no chance of missing a fire alert, and scenarios let you automate fire security to enhance home protection while you’re away. A complete set with stable wireless communication — essential reliability tested over the years by nearly two million users.
Full monitoring for the building
The system instantly notifies about alarms with the critical alerts from the Ajax apps. Security companies and users know exactly which device triggered, when and where it happened. The system controls each device state and reports if there is a malfunction or it's time to replace the batteries.
The event log records 500 recent events within the system. The data is explicit with the device, time, and description of the event. It helps reconstruct the actual event and find the causes to obtain comprehensive information for firefighters or an insurance company.
Monitoring with PRO Desktop
With PRO Desktop, building administration staff can observe not only security but Ajax fire detectors for instant reaction to alarms. Device statuses, event log, batteries data — the CMS operator has a complete picture in one intuitive interface, all informative and centralized. The installation engineer can remotely change the settings and provide services in time.
Advanced automation for greater safety
Ajax fire detectors are a part of the Ajax ecosystem and can interact with automation devices and PhOD detectors of the MotionCam lineup through scenarios. In the case of an alarm, the WallSwitch relay turns on ventilation, and Relay unlocks emergency exits. At the same time, MotionCam (PhOD) sends pictures into Ajax apps to indicate the people inside the premises who might be poisoned by carbon monoxide and need emergency assistance. The result is a reliable combination of security and automation that works as a Swiss watch.
To supply fresh air and reduce carbon monoxide concentration in the air.
CO detected
FireProtect 2
WallSwitch
Ventilation on
To speed up people’s evacuation and ease emergency and rescue services access to the building.
CO detected
FireProtect 2
Relay
Emergency exits unlocked
Jeweller
Unique wireless technologies
The Ajax system uses two-way secure radio communication based on the Jeweller proprietary protocol. It supports block cipher encryption and device authentication on every session with the hub to prevent sabotage, spoofing, or data theft.
Up to 1,00 m of radio communication with a hub
Encrypted two-way radio communication
Notifications about jamming and connection loss
Scaled and comprehensive
For complex radio signal conditions like large houses with thick walls or warehouses with several buildings, there is the ReX range extender. It boosts the range of all Ajax devices and manages their communication with the hub via Jeweller. And ReX 2 assures stable communication even through steel and concrete via Ethernet using the wire as the additional communication channel. Up to 5 range extenders can operate within one Ajax system to expand the network twice as big, covering underground parking, basements, and metal hangars.
Up to 5 range extenders within one system
Ethernet as an alternative communication channel
Sleek wiring with CableTrunk accessory
CableTrunk is a solution for safe and aesthetic joining between the Ajax mains-powered FireProtect 2 AC and cable trunking. Run power wires to the side of the detector while preserving the neat look of the ceiling.
Effortless installation and maintenance
FireProtect 2 AC is ready to operate straight out of the box. It takes only 90 seconds to install the detector with no need to disassemble the enclosure. The upgraded SmartBracket mounting panel now has the lever-actuated WAGO 221 connectors familiar to every industry expert. An installer can wire the power supply without a screwdriver, secure the detector on ceilings, and level it at 90° angles after mounting.
The device is paired with the hub by scanning the QR code in the Ajax apps. And it can always be reconfigured remotely without site visits. A self-test system automatically diagnoses sensors and reports their state to the hub. Testing can also be run manually anytime in the app or by pressing the detector front panel.
Pairing with the hub via QR code
SmartBracket with the WAGO 221 connectors to secure the wires without screwdriver
Configuring and testing in the mobile or desktop apps
The dustproof smoke chamber that does not require cleaning
Technical information
FireProtect 2 AC (CO) Jeweller
Ajax product lines
Superior, Fibra, and Baseline product lines are mutually compatible. This opens up numerous possibilities for building systems of any configuration.
