Release: FireProtect 2 AC is now available for order

Ajax Systems is thrilled to announce the new product release. FireProtect 2 AC is designed to disrupt markets where standards require the 110–240 V~ mains connection. The release includes five models with a different set of sensors: heat, smoke, CO, or combined. Each sensor is marked in the detector name for convenience:

AC detectors comply with:

• EN 14604:2005/AC:2008
• EN 50291-1:2018
• EN 54-5:2017+A1:2018
• BS 5839 (Grade D1/F1)
• BS 5446-2:2003 — in progress

AC fire detectors inherited all FireProtect 2 signature features. Each detector is powered by 110–240 V~ mains and includes a sealed backup battery. Even in a power outage, the device continues to operate, ensuring quick and reliable fire detection throughout its 10-year lifespan. Detectors are traditionally equipped with a powerful 85 dB siren to alert about fire threats with different patterns for each alarm or event. It’s much easier to distinguish between alarm types and react accordingly.

The SmartBracket mounting panel is reinvented completely to ease the installation process. The panel now consists of a mounting part and a protective lid in order to keep an installer safe from direct contact with electrical wiring. The lever-actuated WAGO 221 connectors inside SmartBracket can be easily removed and switched back during the wiring. There is no need to disassemble the enclosure or use a screwdriver at all. It takes only 90 seconds to install the detector.

AC detectors also have an upgraded interconnected fire alarm function. Additionally to the primary interconnection via Ajax hub (activates in 20 seconds), new fire detectors can activate a synchronous fire alarm directly detector-to-detector via fallback interconnection (activates within a minute).

Upgrade your system to the next level with enhanced capabilities, improved performance, and seamless integration.

​Learn more about mains-powered FireProtect 2 AC detectors

Key features:

• A patented smoke chamber is dustproof, impenetrable to insects, and does not require regular clean-ups.
• A dual-spectrum optical sensor paired with the HazeFlow 2 software algorithm ignores vapor and water steam.
• Two A1R-class thermistors are located outside the enclosure to eliminate detection delays.
• Alarms when the temperature increases by 10 °C within a minute or exceeds +64 °C.
• Accurately detects the CO level for up to 10 years.
• Warns when the concentration reaches the dangerous level of 50 ppm before the first signs of poisoning occur.
• Powered by 110–240 V~ mains and has a sealed battery to serve as a backup.
• Built-in 85 dB siren with different patterns to indicate an alarm or event.
• Operates autonomously or as a part of an Ajax system.
• Removable WAGO 221 connectors to secure the wires without a screwdriver and disassembling the enclosure

Learn more about FireProtect 2 AC: